Click any point on the land — see the predicted laptop speed
Choose an AP location and band. The colour overlay is the predicted laptop download speed at 1.5 m above ground across the parcel. Click the map to read the nearest 10 m sample: distance from the AP, RSSI and predicted speed. The panel also shows the predicted values at the container for the selected scenario.
Speed map: red = weak/none, yellow = ~50–100, green = ~200–300, teal/blue = 400–800 Mbps. Overlay is transparent outside the parcel. Click for values; the map is a model, not a survey.
Container performance and parcel coverage by AP location
The container is the critical client. These are the predicted values at the container and the percentage of the 780 parcel points where a laptop gets at least 10 Mbps. The AP is at 14 m; the laptop is at 1.5 m.
| AP location | Container 2.4 GHz | Container 5 GHz | Parcel 2.4 coverage | Parcel 5 coverage | 2.4 range (90% / max) | 5 range (90% / max) |
|---|---|---|---|---|---|---|
| N105 14 m AP |
-61.7 dBm 300 Mbps |
-73.3 dBm 346.3 Mbps |
100.0% | 93.2% | 276 / 319 m | 278 / 319 m |
| SE220 14 m AP |
-72.4 dBm 217.9 Mbps |
-85.7 dBm 100.3 Mbps |
50.0% | 34.9% | 465 / 487 m | 227 / 270 m |
| N50 14 m AP |
-50.1 dBm 300 Mbps |
-59.3 dBm 672.3 Mbps |
100.0% | 99.9% | 234 / 290 m | 234 / 290 m |
| N117 14 m AP |
-64.5 dBm 300 Mbps |
-76.9 dBm 266.8 Mbps |
85.8% | 54.2% | 318 / 354 m | 311 / 349 m |
| NW288 14 m AP |
-81.1 dBm 121.1 Mbps |
-96.8 dBm 12.5 Mbps |
91.4% | 75.1% | 402 / 490 m | 269 / 340 m |
| Container AP (ref.) 3 m AP |
-28.1 dBm 300 Mbps |
-37.2 dBm 800 Mbps |
84.0% | 53.6% | 274 / 340 m | 285 / 340 m |
“Coverage” = % of the 780 parcel points with ≥10 Mbps predicted. “Range” = distance of the 90th-percentile good point / furthest good point; it is not a perfect circle because terrain, canopy and the parcel shape vary. Container AP is a 3 m reference AP at the container, not at the antenna.
What stands out
N50 is the best AP-at-antenna location for the container: 51 m away, 300 Mbps on 2.4 GHz and 672 Mbps on 5 GHz, essentially full-parcel coverage. N105 is the best compromise: 98 m to the container, 300/346 Mbps, 100%/93% coverage. SE220 has the strongest RF but its 5 GHz container link is only ~100 Mbps at −85.7 dBm, and only 35% of the parcel gets 5 GHz. NW288 is worst for the container: 291 m, 5 GHz down to ~12.5 Mbps at −96.8 dBm.
How far does each AP reach at 14 m?
Range depends on direction: terrain, canopy and the parcel shape make it irregular. The table gives the distance where a laptop still gets ≥10 Mbps — the 90th percentile and the furthest point found. Use the app’s map for the actual shape.
| AP location | 2.4 GHz 90% range | 2.4 GHz max | 5 GHz 90% range | 5 GHz max |
|---|---|---|---|---|
| N105 | 276 m | 319 m | 278 m | 319 m |
| SE220 | 465 m | 487 m | 227 m | 270 m |
| N50 | 234 m | 290 m | 234 m | 290 m |
| N117 | 318 m | 354 m | 311 m | 349 m |
| NW288 | 402 m | 490 m | 269 m | 340 m |
| Container AP (ref.) | 274 m | 340 m | 285 m | 340 m |
These are modelled ranges at 1.5 m laptop height through forest, not open-field ranges. The AP is inside the tree canopy at N105/SE220/N50/N117; NW288 is a 15 m tree with the AP at 14 m. The 2.4 GHz band penetrates foliage better; 5 GHz gives more speed at close range but falls away faster.
2.4 GHz — the reliable band
At 14 m, 2.4 GHz gives the best coverage through the forest and the best chance at the container. N50 is essentially full-parcel; N105 is full-parcel; N117 covers 86%; SE220 50%; NW288 91%. Use 2.4 GHz for the camera, phones and the container link.
5 GHz — the fast local band
5 GHz gives 300–800 Mbps close to the AP, but the container link falls off sharply: N50 672 Mbps; N105 346; N117 267; SE220 100; NW288 12.5. Use 5 GHz for laptops near the mast; do not rely on it for the container at SE220/NW288.
Putting the AP at the antenna changes the WiFi story
At 14 m the AP is high above the understory, which helps, but it is inside the tree crown at N105, SE220 and N117. The container is the hardest client because it is 51–291 m away and the signal has to cross forest. The table below is the predicted container link for each AP-at-antenna scenario, plus the container-AP reference.
| AP location | Distance to container | 2.4 GHz at container | 5 GHz at container | Parcel coverage 2.4 / 5 |
|---|---|---|---|---|
| N50 | 51 m | −50.1 dBm · 300 Mbps | −59.3 dBm · 672 Mbps | 100% / 99.9% |
| N105 | 98 m | −61.7 dBm · 300 Mbps | −73.3 dBm · 346 Mbps | 100% / 93% |
| N117 | 110 m | −64.5 dBm · 300 Mbps | −76.9 dBm · 267 Mbps | 86% / 54% |
| SE220 | 214 m | −72.4 dBm · 218 Mbps | −85.7 dBm · 100 Mbps | 50% / 35% |
| NW288 | 291 m | −81.1 dBm · 121 Mbps | −96.8 dBm · 12.5 Mbps | 91% / 75% |
| Container AP (ref., 3 m) | 7 m | −28.1 dBm · 300 Mbps | −37.2 dBm · 800 Mbps | 84% / 54% |
The container AP reference is at 3 m, not at the antenna; it shows what a local AP can do at the container. Its lower parcel coverage is because it is only 3 m high and the forest shadows it; the N50/N105 14 m APs see over more of the parcel.
N50 — best container WiFi
51 m from the container, 2.4 GHz 300 Mbps and 5 GHz 672 Mbps at the container, essentially full-parcel coverage. If the AP must be at the antenna and the container WiFi matters most, N50 wins. But its cellular RF is the weakest of the three main spots (44 Mbps Optus / 14 Telstra).
N105 — best compromise
98 m to the container, 300 Mbps on 2.4 GHz and 346 Mbps on 5 GHz, 100%/93% parcel coverage. It keeps the best cellular speed (94 Mbps Optus / 42 Telstra) and still gives strong WiFi at the container. This is the best single-AP-at-the-antenna compromise.
SE220 — strongest cellular, weaker WiFi
214 m to the container. 2.4 GHz is still usable at 218 Mbps, but 5 GHz falls to 100 Mbps at −85.7 dBm and only 35% of the parcel gets 5 GHz. Choose SE220 for the cellular link, not for container WiFi.
NW288 — worst for the container
291 m to the container. 5 GHz collapses to 12.5 Mbps at −96.8 dBm; 2.4 GHz is 121 Mbps at −81.1 dBm. Its high parcel coverage comes from being high on the western ridge, but it is the wrong AP location for the container.
One AP at the antenna: N105 is the compromise; two APs is still better
If you insist on a single AP, put it at N105, 14 m: it keeps the best cellular result and gives 300 Mbps on 2.4 GHz / 346 Mbps on 5 GHz at the container. If container WiFi is the top priority, N50 is better (300/672 Mbps) but its cellular link is weaker. For the best WiFi and the best cellular link, use two APs: the WAVLINK at the container and a second AP at the mast, or simply keep the container AP and let the mast be a pure 4G/5G backhaul.
| Design | Container WiFi | Cellular | Verdict |
|---|---|---|---|
| Single AP at N105, 14 m | 2.4 GHz 300 Mbps; 5 GHz 346 Mbps | 94 Mbps Optus / 42 Telstra | Best single-AP compromise |
| Single AP at N50, 14 m | 2.4 GHz 300; 5 GHz 672 Mbps | 44 Mbps Optus / 14 Telstra | Best container WiFi, weaker cellular |
| Single AP at SE220, 14 m | 2.4 GHz 218; 5 GHz 100 Mbps | 75 Mbps @ −67 dBm | Strongest cellular, weaker container WiFi |
| Single AP at NW288, 14 m | 2.4 GHz 121; 5 GHz 12.5 Mbps | 62.7 Mbps Optus | Not recommended for container WiFi |
| Dual AP: N105 mast + container AP | Container AP: 300/800 Mbps | 94 Mbps Optus / 42 Telstra | Best overall |
| Container AP only + N105 fiber backhaul | 300/800 Mbps at container | 94 Mbps Optus / 42 Telstra | Best practical (v4 recommendation) |
The 1 m rule is fine — but the container is the problem
Moving the AP from the container to 1 m under the antenna helps clients near the mast and gives a strong local 5 GHz bubble. It does not solve the container: at N105 it is still 98 m of forest; at SE220 214 m; at NW288 291 m. The cleanest design remains a local AP at the container and a fiber/PoE backhaul from the mast. If you want WiFi around the mast as well, add a second AP at 14 m and connect it by fiber or PoE.
The app’s “Container AP” scenario is a 3 m reference, not the 14 m antenna AP. It shows why a local AP is so much stronger at the container: −27.9/−37.2 dBm and 300/800 Mbps, versus −61.7/−73.3 at N105.
How the WiFi maps were computed
Model
- AP: 14 m at N105/SE220/N50/N117/NW288 (1 m under the 15 m antenna); 3 m for the container reference.
- Laptop: 1.5 m above ground, 2×2 MIMO, 2 dBi.
- AP radio: 30 dBm, 8 dBi omni (WAVLINK AX3000), 1 dB cable, 3 dB clutter.
- Bands: 2.4 GHz 40 MHz (cap 300 Mbps); 5 GHz 80 MHz (cap 800 Mbps). Noise −91/−88 dBm; Shannon × MAC 0.55 × 0.8.
- Propagation: terrain profile at 5 m, 4/3 Earth, dominant-edge diffraction + 3 dB; LIST LiDAR canopy; P.833 foliage at 0.8; 2 dB laptop leaf; 3 dB AP crown.
- Grid: 780 parcel points at 10 m; click uses nearest 10 m sample.
Limits
- Outdoor model: no container wall. Inside the metal container, subtract roughly 10–15 dB and expect lower 5 GHz.
- Canopy is a sample: LIST LiDAR 2 m; the AP is inside the crown at N105/SE220/N117, so local loss is approximate.
- No interference survey: 2.4 GHz is crowded; neighbours, cameras and microwave ovens can reduce throughput.
- No device diversity: laptop 2×2; phones/camera may be 1×1 or 2×2 and get less.
- Model, not a survey: use the app to choose test points; confirm with a laptop and the actual AP.
Sources
- Tasmanian LIST Tree Canopy Height (2 m LiDAR): LIST ArcGIS REST; thelist.tas.gov.au.
- WAVLINK AX3000 outdoor AP: product page.
- MikroTik ATL 5G R16: product page; Reolink TrackMix: product page.
- ACCC 2026: data.gov.au; ACMA/RFNSA via GIS Geek: Telstra Deloraine.
- Esri World Imagery: esri.com; OpenStreetMap: openstreetmap.org.
Bottom line
N105 at 14 m is the best single-AP-at-the-antenna compromise: 94 Mbps cellular, 300 Mbps 2.4 GHz / 346 Mbps 5 GHz at the container. N50 has the best container WiFi (300/672 Mbps) but weaker cellular. SE220 is the strongest cellular but its 5 GHz container link is only ~100 Mbps. Two APs — one at the container, one at the mast — is still the best overall design.