Method — photo-first appraisal (AI dealer agents): identification from photographs only, then a live internet comparables hunt (SOLD prices preferred over asking), then a private-sale AUD valuation for the QLD market. Asking prices as listed; valuations assume visible condition, exclude transport; verify in person.
6 buy candidates · 12 negotiate · 6 skip · 177 images embedded
Summary — sorted by category, then value delta (appraised mid − ask)
| Photo | Piece | Ask | Appraised mid | Delta | Category | |
 |
Mid Century Fler 64 Sideboard |
A$1,190 |
A$1,900 |
+A$710 |
BUY |
view ↓ |
 |
Set of 6 Vintage Retro Mid Century Teak Cigar Leg D… |
A$245 |
A$525 |
+A$280 |
BUY |
view ↓ |
 |
Mid century Chiswell dining chairs x3 |
A$100 |
A$330 |
+A$230 |
BUY |
view ↓ |
 |
Chiswell Mid Century Teak Display Cabinet |
A$470 |
A$650 |
+A$180 |
BUY |
view ↓ |
 |
Vintage Mid Century Armchairs | Sleigh Base Teak |
A$280 |
A$400 |
+A$120 |
BUY |
view ↓ |
 |
Vintage retro mid century modern dining chair / ON… |
A$45 |
A$70 |
+A$25 |
BUY |
view ↓ |
 |
Antique Red Cedar Chest of Drawers Vintage Austra… |
A$180 |
A$250 |
+A$70 |
NEGOTIATE |
view ↓ |
 |
Vintage retro matching mid century foot stools |
A$80 |
A$100 |
+A$20 |
NEGOTIATE |
view ↓ |
 |
Vintage 1950s FLER early cocktail/TV slipper design… |
A$80 |
A$100 |
+A$20 |
NEGOTIATE |
view ↓ |
 |
Mid-Century Parker Nest of Tables Teak Veneer tops… |
A$90 |
A$100 |
+A$10 |
NEGOTIATE |
view ↓ |
 |
Vintage MCM Sideboard |
A$400 |
A$400 |
+A$0 |
NEGOTIATE |
view ↓ |
 |
Mid Century Modern Burgess Teak Display Drinks Cabi… |
A$490 |
A$480 |
−A$10 |
NEGOTIATE |
view ↓ |
 |
2x Fler Solid Teak Lounge Chairs - Vintage - Excell… |
A$400 |
A$380 |
−A$20 |
NEGOTIATE |
view ↓ |
 |
✨ RARE & BEAUTIFUL VINTAGE/ANTIQUE SIDEBOARD ORNATE… |
A$280 |
A$250 |
−A$30 |
NEGOTIATE |
view ↓ |
 |
Restored Retro MCM 1960s Lowline Credenza / TV Unit… |
A$550 |
A$500 |
−A$50 |
NEGOTIATE |
view ↓ |
 |
Vintage 1960’s Don Rex 3-Seater Lounge Sofa. Pair C… |
A$1,400 |
A$1,350 |
−A$50 |
NEGOTIATE |
view ↓ |
 |
Hans Borg Vintage Mid Century Modern Teak Sideboard… |
A$900 |
A$780 |
−A$120 |
NEGOTIATE |
view ↓ |
 |
Vintage Australian Mid-Century Sideboard / Buffet –… |
A$850 |
A$700 |
−A$150 |
NEGOTIATE |
view ↓ |
 |
Retro Vintage Chiswell 60's Coffee Table |
A$340 |
A$220 |
−A$120 |
SKIP |
view ↓ |
 |
MCM Style Tallboy Drawers / Sideboard |
A$600 |
A$420 |
−A$180 |
SKIP |
view ↓ |
 |
Mid-Century Modern Armchairs — Restoration Project… |
A$550 |
A$300 |
−A$250 |
SKIP |
view ↓ |
 |
Mid century modern 60's teak Parker bedside table |
A$495 |
A$220 |
−A$275 |
SKIP |
view ↓ |
 |
6 Mid Century Teak Dining Chairs G-Plan Leslie Dand… |
A$1,200 |
A$700 |
−A$500 |
SKIP |
view ↓ |
 |
Mid Century Modern Parker XL Teak Sideboard |
A$3,490 |
A$2,400 |
−A$1,090 |
SKIP |
view ↓ |
★ Top Find
Mid Century Fler 64 Sideboard
BUY
Ask A$1,190
Identification (from photos)
- Piece
- Sideboard / buffet (long-format 'XL' layout: bank of 4 central drawers flanked by two cupboard doors each side)
- Style
- Australian mid-century modern, Fler 'Series 64' design language (Fred Lowen / Ernest Roddick)
- Era
- c.1964-1970
- Materials
- Teak (veneer on carcass with solid teak legs/edges per period construction); recessed oval 'grip' drawer pulls; brass locks visible on door stiles
- Maker guess
- Fler (Australia) — 'Fler 64' model, XL/long variant
- Maker confidence
- medium
- Distinguishing features
- Standard Fler 64 central four-drawer bank with signature recessed oval pulls and lockable doors, but at 2150 mm with cabinets BOTH sides this is the rarer XL format (standard Fler 64 is ~1830-1850 mm with drawers at one end only). Tapered square teak legs, high plinth apron. Layout and proportions match the XL Fler 64 (cf. Upcycld 'Rare XL Fler 64', 213 cm).
- Condition from photos
- Overall strong. Warm even teak tone, grain consistent with original/refinished teak veneer. Top in img_4 shows paler patchy areas front-left — likely sun-fade or a blended finish wear area, needs in-person check. Seller admits scratches on 2 doors (visible as light scuffs on left doors, img_1). Doors aligned, hinges present, no visible veneer chips/lifting or leg damage. No Fler label visible in photos.
- Seller condition grade
- Used - Good
Check in person
- Fler paper label inside top drawer or cabinet (with series identifier) — attribution is the whole price gap vs generic teak; no label visible in any photo.
- Top surface under raking light: is the pale patching in img_4 sun-fade, a repair, or a partial refinishing? A badly blended or DIY-sanded top takes ×0.5-0.7 off.
- Confirm 2150 mm length and XL cabinet-both-sides configuration vs the standard 183 cm (the XL premium is ~$300-600).
- Drawer runners and the felt-lined cutlery drawer (original XL/64 spec), internal shelf, working lock + key, leg joints for wobble or reglue, and the extent of the two door scratches up close.
Valuation — private sale, QLD market (AUD)
A$1,500 – A$2,300A$1,900+A$710
mid − ask = +A$710 · confidence: medium
The Fler 64 is the most sought-after Australian MCM sideboard line: Abbeys (Jul 2026) sold one at $2,200 hammer (2.2x estimate, ~$2,728 with BP); standard-size dealer evidence clusters $2,099-2,850 asking with a $2,400 sold-out at Southside Collector. Dealer→private (×0.6-0.7) puts a good standard Fler 64 at roughly $1,400-2,000. The subject piece carries a size premium: at 2150 mm with the cabinet-drawers-cabinet XL layout it matches the 'Rare XL Fler 64' that dealers list at $3,099 (private-equivalent ≈ $1,860-2,170). Offsets: visible finish patchiness on the top (possible sun-fade/blend — a collector sees ×0.85 at worst), admitted door scratches, and unverified attribution (no label in photos; unattributed 'Fler era' pieces trade at generic-teak prices, cf. Leonard Joel $800-1,600 sold band). Private-sale band for Brisbane Sep 2026: $1,500-2,300, mid $1,900.
Upside: Mid − ask = $1,900 − $1,190 ≈ $710 expected margin; even the low end ($1,500) leaves ~$310 headroom. If the Fler label is present and the top is sound, resale into the $2,200-2,600 private tier is realistic; dealers in QLD (MM Furniture Gold Coast, Structured Rebellion) actively retail this exact model.
Comparables evidence (5)

Rare XL 'Fler 64' buffet / sideboardUpcycld (Melbourne dealer)
A$3,099asking
listing live Sep 2026, status Sold Out
Closest format match: XL Fler 64 (~213 cm) with cabinets both sides, same layout as subject piece. Dealer retail $3,099 — private equivalent ≈ $1,860-2,170 at the ×0.6-0.7 rule.

Fler 64 Mid-Century Teak Sideboard / Buffet (1825 mm)Southside Collector (dealer)
A$2,400sold
retrieved 19 Sep 2026 (page shows regular price $2,400, status SOLD; sale date not shown)
Standard-size Fler 64 in 'good vintage condition with light marks' — same condition tier as subject; sold at $2,400 dealer price ⇒ private ≈ $1,450-1,680 for a standard size.
Leonard Joel…A Mid-20th Century Teak Sideboard (78H x 205W x 45D), Leonard Joel Auction SalonLeonard Joel (auction, maker-not-stated floor)
A$1,600sold
retrieved 19 Sep 2026 (sale date not shown in results page)
Unattributed large teak MCM sideboard of similar 2 m length sold for $1,600 against a $400-600 estimate — floor reference for a large MCM teak sideboard even WITHOUT a Fler name; named Fler 64 sits clearly above this.
Evidence summary
4 listing photos reviewed (front, two 3/4 views, top). Model identified from recessed oval pulls, lockable doors, tapered square teak legs, and the known Fler 64 drawer-bank design; length/layout indicate the rare XL variant. 5 retrieved comparables: 1 dated named-model auction SOLD (Abbeys 18 Jul 2026, $2,200 winning bid, est. $700-1,000), 1 named-model dealer SOLD ($2,400), 3 dated-live asking ($3,099 XL, $2,850 standard, $1,600 LJ generic sold as floor). Market guide Fler sideboard private band $1,200-2,800 and Upcycld 2026 journal ($1,800-3,200 Melb/Sydney, Fler 64 upper end) corroborate.
Verdict (BUY): likely underpriced
Caveats: Maker attribution rests on seller claim + design match; photos show no label — a 'Fler-era' lookalike would be worth $800-1,400 instead, which is why confidence is medium and the low band sits only $310 above ask. Abbeys lot size unconfirmed; Southside Collector and Leonard Joel sale dates not published on retrieved pages. eBay AU sold data inaccessible (403) — not used. Gumtree 'Danish Fler sideboard $1,000' snippet seen but discarded as off-model/undated.
★ Top Find
Set of 6 Vintage Retro Mid Century Teak Cigar Leg Dining Chairs 2 Carvers 4 Standard
BUY
Ask A$245
Identification (from photos)
- Piece
- Dining chair set — 6 chairs: 4 standard side chairs + 2 carved/armed carvers
- Style
- Australian mid-century modern, tall slim upholstered slip-panel back, curved top rail, cigar-turn tapered legs (AU-60s idiom)
- Era
- c.1960-1972
- Materials
- Solid timber frame; seller claims teak — grain/colour in photos is plausible teak but has the reddish tone and open figure of silky oak (a near-identical AU-60s cigar-leg timber); pale sage-green ribbed/corduroy upholstery, appears original
- Maker guess
- Unbranded / unknown Australian maker (generic cabinetmaker output; design loosely echoes Elite/Parker-era dining chairs but no maker cue visible)
- Maker confidence
- low
- Distinguishing features
- All 6 chairs present and matching (2 carvers + 4 standard confirmed in img_1); narrow upholstered back panel under arched top rail; cigar-turned front legs; carvers have sculpted down-swept arm pads
- Condition from photos
- Complete 6-chair set, structurally upright; finish heavily worn/bleached on top rails (img_3) and arm pads (img_2, img_4 — bare, darkened wear patches); fabric intact with no visible tears but general age-soiling and a dark smudge/stain on one standard seat (img_3); seat padding looks slightly compressed; seller discloses 2 tiny back chips needing putty, one carver frame joint opened (needs glue/clamp), timber needs clean+oil. Photos cannot show joint wobble on the other 5 chairs, underside/labels, or stain history — check in person
- Seller condition grade
- Used - Good
Check in person
- Wobble/rack test all 6 chairs and inspect the opened carver joint — confirm it is a clean reglue and not a cracked or previously botched-repaired tenon; also check the remaining 5 joints on that same chair
- Look under the seats for maker's labels/stamps (Parker, Chiswell, Elite, Fler) — a stamp roughly doubles the value; also check the timber: oily straight-grained teak vs figured reddish silky oak (silky oak keeps value at the LOW end of the band)
- Smell and inspect the dark seat stain in img_3 for pet urine (unkillable dealbreaker) and sit-test padding/springs on every chair — compressed foam adds ~$80-120/chair to refurb
- Verify all legs are original and tight (cigar legs often get replaced/reglued), check the two back chips are cosmetic, and confirm the set really is 6 complete chairs at pickup (listing shows 10 photos, only 4 supplied)
Valuation — private sale, QLD market (AUD)
A$380 – A$700A$525+A$280
mid − ask = +A$280 · confidence: medium
Market guide band for unbranded AU teak set-of-6 is $400-900 private. Retrieved evidence brackets it: LJ sold an unbranded teak 6-set clean at $800 hammer (Sep 2025), Lawsons sold a NAMED Parker 6-set in poor-fabric condition at only $550 hammer (Mar 2026), and an unbranded 10-chair job-lot at $425 (Sep 2025). This set is complete and matching (carvers carry a small premium) but sits at the worn end: bleached/abraded top rails and arm pads, soiled and possibly stained fabric, two back chips, and one opened carver joint (≈×0.65-0.8 of the $650 band midpoint). That lands at ~$380-700, mid ~$525 in the as-is condition on Brisbane private sale. A restored set of this design supports the ~$900-1,500 private tier (dealer twin asking A$990 per PAIR shows the restored ceiling), but restoration cost is the constraint.
Upside: Mid $525 vs ask $245 → expected margin ≈ A$280 if all six are structurally sound (mid − ask). The cheap route is DIY: glue+clamp the one joint, fill/oil, deep-clean fabric → resell ~$500-650. Full reupholstery (approx $120-200/chair for simple dining-chair covers in Brisbane, ~$750-1,100 for 6) would erase the entire margin — only worth doing if the frames prove excellent or as a personal-use set. Do NOT chase Parker/Chiswell named-maker value without a stamp.
Evidence summary
5 retrieved comparables, 3 dated AU auction SOLD results (Lawsons Parker 6-set $550 Mar-2026; Leonard Joel unbranded teak 6-set $800 Sep-2025; Lawsons unbranded 10-chair job $425 Sep-2025), 1 dealer asking for the exact cigar-leg design pair ($990, ~$2,970 set-equivalent dealer ask), 1 named-maker sold ceiling ($2,100 Parker, 2020). Photos confirm all 6 chairs present (2 carvers + 4 standard), original-looking fabric intact but soiled, finish worn on rails/arms. Comp images saved: comp_lawsons_parker.jpg, comp3_cigar_legs_elite.jpg, comp_chiswell_sold.jpg (Antiquestore Retro Chiswell teak dining+carver set of 6, sold, price unpublished — page-reference only, not used as a priced comp).
Verdict (BUY): likely underpriced
Caveats: Maker is unverified and timber is teak-or-silky-oak (photos cannot resolve species; a silky-oak identification pushes value to the low band, a maker stamp pushes above it). Only 4 of the listing's 10 photos were available. eBay AU sold data blocked (403) and Gumtree AU returned no usable dated AU teak 6-set listing, so comparables lean on AU auction results and dealer sites; auction hammers ≈ wholesale-to-middle of private value, so private asking can run ~20-40% above hammer. Location listed 'Brisbane' pickup Capalaba — outside the 15 km Petrie/Caboolture radius, so transport cost applies.
★ Top Find
Mid century Chiswell dining chairs x3
BUY
Ask A$100
Identification (from photos)
- Piece
- Dining side chairs, three of an apparent original set of six
- Style
- Australian mid-century modern (Danish-influenced)
- Era
- c. 1965-1975
- Materials
- Teak / teak-finished hardwood frames; upholstered back panel set into frame; drop-in upholstered seat (foam pad, coarse herringbone/basketweave beige textile). No cane (seller says loose backrest, not caned).
- Maker guess
- Chiswell (plausible) — sculpted flared top rail with upswept 'horn' tips, slim upholstered back and light tapered legs match the Chiswell dining-chair design sold by iNVISeDGE (stamped 10/71) and the 'sculpted frame' Chiswell set at Grandfather's Axe
- Maker confidence
- medium
- Distinguishing features
- Curved top rail with flared/pointed horn tips; square-section legs tapering with subtle flare at the top (Chiswell's 'cigar leg' barrel swell is not clearly visible in photos); pale woven fabric on both seat and back panel; in img_4 the front-left chair's seat fabric looks like a different weave/tone to the others — possible mix-match or partial re-cover
- Condition from photos
- Frames look straight and intact with sound-looking finish; slight paleness/wear at the tips of top rails (sun or handling wear); fabric appears clean, no visible tears or stains; seller discloses one chair's back rest slightly loose (reglue/renew joint); underside, seat pads and joints not visible. Honest original condition with one disclosed structural defect.
- Seller condition grade
- Used - Good
Check in person
- Chiswell label/stamp — look under the seat pan, inside the seat rails and on the underside of the top rail; absence drops these to generic-teak pricing and the $100 becomes 'fair' not 'bargain'.
- The disclosed loose backrest: rock the back on all three chairs — confirm it is a simple loose glue joint (cheap fix) not a cracked/failed tenon or broken rail; test all four legs for wobble.
- Drop-in seats: lift one out — check foam not crumbling, no webbing sag, no water stain or veneer blowout on the seat underside; verify whether the fabric is original (period vinyl would suggest re-cover, affecting price).
- Fabric consistency across the three (photo 4 hints the front-left seat is a different weave/colour) and any odours/vermin in the garage storage; also check top-rail tips for sun-bleach and repairs to leg replacements.
Valuation — private sale, QLD market (AUD)
A$250 – A$450A$330+A$230
mid − ask = +A$230 · confidence: medium
Named-maker Chiswell 6-set private band $700–1,300 (guide) → mid ~$1,000 → per-chair ~$165. Partial-set rule (×0.8 per missing-chair penalty): 165 × 0.8 × 3 = $400 for 3 in good condition. Condition deductions from photos: disclosed loose back joint (reglue −$50–150 across the lot) and probable mix-match/different fabric on one seat (−$100 if buyers want re-cover uniformity; full re-cover would be ~$150–200/chair) → mid ~$330. Cross-checks: Islington asking $112/chair excellent original; eBay partial sets bid/ask $66–131/chair; Leonard Joel est $60–75/chair wholesale floor. All bracket $80–150/chair for these → $250–450 for the three. If the maker stamp is absent and they trade as generic teak MCM (unbranded $400–900/6 → per-chair ~$100 × 0.8 × 3), value compresses to ~$180–300 — still above the ask.
Upside: Buying 3 more matching chairs (rare but they surface on Gumtree/FB) would transform value: 6 matched Chiswell in good original condition privately sell $700–1,300. Even without matching, flipping as a 3-lot ('perfect for a 3-seater nook / kitchen bench set') at $300–400 is realistic after a clean and glue repair. Margin at ask: ~$150–350 gross, before transport (~$40–60) and any reglue/re-cover.
Comparables evidence (7)

SIX 6 Chiswell Dining Chairs (stamped 10/71), iNVISeDGE consignmentinvisedge.com.au
A$840sold
sold 2006; dealer states exact same set of 6 would be priced >$1,140 in 2020
Named Chiswell dining 6-set, same slim Danish style; sold anchor $840 (2006) / dealer 2020 equivalent ~$1,140 for 6 = ~$190/chair (dealer tier, excellent condition). Directly supports ~$150/chair private before partial-set haircut.

4x Chiswell teak dining chairs (eBay AU auction, via PicClick)picclick.com.au (mirrors eBay AU)
A$266asking
retrieved 19 Sep 2026; live auction, 2 bids, 3d to close
Partial set (4, not 6) of Chiswell teak dining chairs — closest structural comparable to a 3-offer lot. Current bidding only ~$66/chair; related eBay set-of-4 asks $525 (~$131/chair).
Evidence summary
7 retrieved comparables (1 sold dealer consignment, 6 dated asking/estimate, 2 of them explicit partial sets): iNVISeDGE sold 6 Chiswell $840 (2006, ~$1,140 2020 equivalent); Islington 8-chair Chiswell ask $895; eBay via PicClick partial 4-sets at $266 (2 bids) and $525 (0 bids); Leonard Joel 4-chair Chiswell est. $200–300; Retro Bay 6-set restored ask $1,490; Grandfather's Axe restored 6-set ask $2,450. Per-chair evidence: wholesale floor ~$60–75, private $110–175, dealer restored $248–408. Market guide band ($700–1,300/set of 6 private) is consistent. No recent AU auction hammer for Chiswell chair sets was freely retrievable (eBay sold and LJ/Lawsons hammers paywalled/blocked) — sold-side evidence leans on the iNVISeDGE consignment record.
Verdict (BUY): BUY — genuine bargain at A$100. Fair private value for 3 chairs with one loose back is ~$250–450 (mid ~$330); even as unbranded teak the three clear the ask. Expect to pay $100 and hold ~$250–400 in resale, less any re-cover. Do not expect set-of-6 money ($700–1,300): three-of-six is exactly why the ask is low.
Caveats: ["Maker attribution is from photos only — no stamp visible in any of the 4 images and the legs do not clearly show Chiswell's diagnostic 'cigar' barrel swell; treat as seller-claimed until stamped.", '3 of a probable 6-set is a standing discount: buyers want full sets; re-selling may take 2–4× longer than a matched 6.', 'Fabric on all three is a 1970s-style woven textile that some buyers will want replaced; a full re-cover (~$450–600 for 3, Brisbane) exceeds the current resale premium and is not assumed in the valuation.', 'eBay figures come via PicClick (eBay AU blocks direct sold/completed fetch); prices shown are live asks/current bids at retrieval, not hammer prices. Leonard Joel figure is an estimate, not a sold price.', "Listing location is 'Brisbane, QLD · approximate' — confirm pickup point within the 15 km radius before committing."]
Chiswell Mid Century Teak Display Cabinet
BUY
Ask A$470
Identification (from photos)
- Piece
- Tall full-height mid-century display cabinet, two sliding glass doors, glass end panels, glass shelves on metal supports, tapered cigar legs; est. ~150-155H x ~100W (proportions from photos)
- Style
- Mid-century modern, Australian 1960s-70s factory MCM
- Era
- c.1965-1975
- Materials
- Teak (veneer bodies with solid teak door frames per Chiswell construction); clear glass doors/ends/shelves; no internal lighting
- Maker guess
- Chiswell (Sydney) — style attribution
- Maker confidence
- medium-high: deep-profile rounded sliding door frames, glass ends, tapered cigar legs and proportions match known Chiswell teak display cabinets; no maker's label photo in the listing, so treat as style-attributed until label confirmed
- Distinguishing features
- Rounded solid-timber sliding door stiles, full-height glass with glass side panels, 3 adjustable glass shelves, cigar/tapered legs, warm refinished finish. NOTE: description claims 'full back mirror and bottom mirror panel' but garage photos (img_2/img_3) show light passing through to the garage behind — the back appears to be clear glass, not mirrored; the staged promo photo (img_1, watermarked 'All Rights Reserved', same props as garage shots — same piece) appears to show a mirrored base. Discrepancy must be verified in person.
- Condition from photos
- Refinished warm teak finish, even satin sheen, top rail looks clean with one small dark spot (img_4, likely pin/plug hole or minor blemish); no visible veneer lifts, cracks or water damage; glass appears intact with no visible chips in doors/ends; shelves seated on metal pins; doors appear to run; seller is evidently a restorer (staged promo shot + 'Fully Restored' claim) — 'like new' claim plausible but unverified
- Seller condition grade
- Used - like new
Check in person
- Turn it around: confirm whether the back is mirrored or clear glass (photos suggest light passes through — contradicts the 'full back mirror' claim) and check the bottom mirror panel for de-silvering
- Look under the base/inside bottom shelf for a Chiswell maker's label or stamp — no label visible in any listing photo; attribution currently style-only
- Slide both doors through full travel: runners wear out and Chiswell sliding doors that bind or jump tracks cost time/money to fix; check glass for chips/cracks at corners and shelf supports for missing pins
- Inspect the refinish up close on top and leg feet for blotchiness, overspray into corners, or water-damage swelling under the new finish (small dark spot on top in img_4); check handles/locks/keys if fitted
- Confirm dimensions and moveability (tall glass cabinet with glass ends needs two people and a blanket; glass-end panels are fragile in transit)
Valuation — private sale, QLD market (AUD)
A$450 – A$900A$650+A$180
mid − ask = +A$180 · confidence: medium — one genuinely comparable sold dealer result and dated auction hammers exist, but no tall-format private sold price found; attribution is style-based (no label photo) and the mirror claim is unverified
Best-match evidence: the closest analogue (Chiswell teak glazed display cabinet, 1960s, dealer-sold at Archer's Ark) fetched $900 dealer-retail; refurbished dealer asks on Collecte sit at $690-890 for the same form factor, and the tall mirrored-back example asks $690. Applying the dealer->private x0.6-0.7 conversion gives $415-620 private for the dealer-ask tier, bracketed by the $900 dealer-sold comp x0.6-0.7 = $540-630. Auction sold hammers for Chiswell glass display cases were only $170-180 (Sydney, as-is, unqualified/veneer cases; +30% BP still under $240 buyer cost) — evidence that display cabinets are genuinely slower and weaker sellers than Chiswell sideboards ($1,000-2,200 private per market guide) and that only top examples with verified label/mirrored back reach the top of the band. This piece is restored, clean, full-height tall format (the more desirable proportion vs the 79cm sideboard-height comps), which supports mid ~$650; but the mirrored-back claim is contradicted by the photos and the maker label is unseen, so the range spans $450 (clear back / label absent) to $900 (labelled Chiswell + mirrored back confirmed). Display cabinets turn over slower than sideboards — hold price expectations accordingly.
Upside: If label confirms Chiswell AND the mirrored back/bottom is real (as described, partly visible in staged shot), resell ceiling is ~$850-950 vs $470 paid — ~$400 gross margin. If back is clear glass and label is absent, realistic exit is $450-550 after the slower display-cabinet sell time — near break-even minus transport.
Comparables evidence (6)

Chiswell Mid Century Vintage Teak Display Cabinet (1960s, W123, glass doors, adjustable glass shelves, tapered legs) — near-identical 3-door version, marked 'Sold'Archer's Ark / Vintage Retro Designs (AU dealer shop page, retrieved 19 Sep 2026)
A$900sold
listed as Sold on live page, retrieved Sep 2026 (product imagery Aug 2026)
high — same maker claim, teak glazed display cabinet, deep-profile door frames, tapered legs
Evidence summary
Photos: 4 reviewed; staged promo shot and 3 garage shots are the same piece (identical props); teak, sliding glass doors with rounded deep-profile frames, glass ends, 3 adjustable glass shelves, tapered cigar legs, clean refinished top. Comps: Archer's Ark Chiswell teak display cabinet SOLD $900 (dealer); Lawsons sold hammers A$180 (2025, veneered Chiswell glass case) and A$170 (2026, 'possibly teak' Chiswell); Collecte asking $690 (Chiswell 102x152 mirrored back) and $890 (Chiswell 131x79); Retro Bay dealer ask $1,190. Dealer->private x0.6-0.7 + display-cabinet discount vs sideboards -> private band $450-900, mid $650 vs A$470 ask.
Verdict (BUY): Fair-to-slightly-under-priced: BUY at or near the A$470 ask if in-person checks pass. It sits at the bottom of the private band ($450-900, mid $650) and well under every dealer comp ($690-1,190 ask; $900 sold) — roughly $150-250 of margin at mid. Not a bargain-bin steal: the two Chiswell display cases that actually sold at auction did so under $200, so paying $470 only works out if this one is the real, well-executed restored piece the photos suggest. Offer $430-450 to start.
Caveats: Few sold records for this exact tall Chiswell format — eBay AU sold data blocked to automation, so no eBay sold cross-check. Maker attribution is style-based until label is seen. The description's mirrored-back claim conflicts with the in-home photos; if the mirror is absent, value sits at the bottom of the band and the ask is merely fair. QLD market may run slightly softer than Sydney dealer pricing on slower-moving display cabinets. Seller 'Fully Restored / like new' is a restorer's claim; refinish quality only judgeable in person.
Vintage Mid Century Armchairs | Sleigh Base Teak
BUY
Ask A$280
Identification (from photos)
- Piece
- Easy/armchairs, sold as PAIR — img_1 clearly shows two matching chairs side by side; img_3 and img_4 show both chairs in frame. Title plural and A$280 almost certainly for the pair, but confirm before paying.
- Style
- Mid-century Danish-style 'sleigh base' easy chair: continuous bent-laminated side frame running from padded rolled arm down a wide cut-out side panel (large rounded-rectangular aperture) into a ski/sled-like base rail; loose seat cushion and loose back cushion; open back panel upholstered in matching fabric.
- Era
- c.1965-1975
- Materials
- Hardwood frame — warm honey tone consistent with teak or stained beech/blackwood lamination (photos cannot prove species; 'teak' in title unverified); plain woven synthetic/wool-blend upholstery in dusty rose/brown (listing oddly states colour 'Purple'), padded roll arms.
- Maker guess
- Unmarked Danish-style easy chair; closest AU/Scandinavian analogues are Danish de Luxe (Melbourne, licensed Danish designs) sleigh-base easy chairs and generic Denmark-export sleigh easy chairs (France & Daverkosen 'Sleigh' type is a different, collector-grade form). No stamp or label visible in the four photos.
- Maker confidence
- low
- Distinguishing features
- Continuous-loop cut-out side rail ('sleigh/ski' profile) tying arm to base — a recognisable late-60s/70s Danish/Australian lounge form; matching rolled arms; loose double cushions. Desirable form but not a named designer model on photo evidence.
- Condition from photos
- Appears very good: fabric clean and unworn with no visible tears, sagging or stains; frames glossy with no obvious cracks, water marks or repairs; both chairs appear original (not reupholstered). Photos are heavily overexposed/pink-cast, so true colour and subtle flaws are masked. Seller states 'Used - like new'.
- Seller condition grade
- Used - like new
Check in person
- Confirm the A$280 price is for BOTH chairs (photos show a pair but listing text is minimal — 'Colour Purple' is oddly wrong vs the rose/brown fabric; also ask how many remain, listing shows 7 photos vs our 4).
- Look under the seat rails/cross members for maker stamps or paper labels (Danish Deluxe, Parker, Fler, Aristoc) — a stamp changes the value band entirely.
- Rock-test the cut-out side rails and arm-to-rail joints: these continuous bent-lamination frames fail at the aperture corners; any crack or movement is a −40-50% defect. Check base rail flex while seated.
- Lift cushions: check Pirelli/rubber webbing perching (replacement ~$50-80/chair), foam sag, underside staining, and odours/pets; verify 'teak' claim (could be stained beech) and that fabric colour matches listing expectation in daylight.
Valuation — private sale, QLD market (AUD)
A$300 – A$550A$400+A$120
mid − ask = +A$120 · confidence: medium
Assuming the A$280 covers the PAIR shown in img_1 (photos clearly show two matching chairs). Unmarked Danish-style sleigh-base easy chairs, good original condition, dated-but-clean fabric. Auction evidence brackets the pair: hammered trade prices A$300 (Parker teak-frame pair, May 2026) to A$750 buyer-cost (Scandi-style pair, Jan 2026); private retail for a presentable, unmarked teak MCM armchair pair in Brisbane runs ~A$300-550, mid ~A$400. Our chairs' strong, complete set, good fabric and distinctive sleigh form support the middle of that band; being unbranded and rosy-fabric dated keeps them out of designer territory (Fler/Parker-Narvik singles alone ask $675+ dealer). Condition appears original-good (no reupholstery deduction needed); minus minor photo-masked flaw risk, midpoint A$400.
Upside: If a stamp appears (Danish Deluxe, Parker, Fler) value roughly doubles: named-maker pairs sell $800-1,350 at dealer tier (iNVISeDGE sold Danish Deluxe pair $1,350). Strong staging + pair sale to a restorer could reach $450-500; beyond that requires documented maker.
Evidence summary
Photo-first: two matching sleigh-base teak-frame easy chairs photographed together (pair). Form = continuous cut-out side rail looping arm-to-ski-base with loose seat/back cushions, c.1965-75, unmarked; closest maker analogue Danish de Luxe / generic Danish export (low confidence). Comparables retrieved & verified: Lawsons pair sold A$300 (14 May 2026, catalog priceResult data) and A$750 (8 Jan 2026, lot page 'Sold: A$750.00'); iNVISeDGE dealer SOLD Danish Deluxe pair A$1,350 (2015); antiquestoretro dealer asking A$675 Fler single (current). Market guide bands: retro armchair private A$100-400 each; unbranded quality pairs typically A$300-600.
Verdict (BUY): BUY / WORTH IT at A$280 as a pair — ask sits below our low-mid private value (A$300-400), so it is fair-to-slightly-underpriced for a good pair; offer A$250 and take the pair. If it turns out to be A$280 for a SINGLE, it is at/above the single-chair private band (~A$150-275) and you should negotiate to ≤A$200 or walk. Only a modest flip margin (~A$120-250 after cleaning and good photos), not a steal.
Caveats: Photos are overexposed with a pink cast — true fabric colour, patina and small flaws are unverifiable from images; no underside/stamp photo; 'teak' is the seller's claim, not verified; pair-vs-single inclusion, joint tightness, webbing and stamp status are check-in-person items; one key sold comp (iNVISeDGE) is 2015 data used only as a ceiling; the A$750 Lawsons result includes ~25-30% buyer's premium and reflects live-auction heat; listing description data ('Colour Purple') conflicts with photos, so confirm details with seller.
Vintage retro mid century modern dining chair / ONE ONLY…
BUY
Ask A$45
Identification (from photos)
- Piece
- Single (orphan) MCM dining chair, upholstered seat + floating crescent backrest pad on black/bronze steel frame
- Style
- Mid-century modern / retro; 'floating' crescent upholstered back on two rear uprights — visually in the Grant Featherston 'Scape' family
- Era
- c. 1960s-1970s; striped mustard velvet/cord cover looks like an era-appropriate (possibly second-generation 70s) fabric
- Materials
- Painted/powder-coated steel flat-bar frame with diagonal under-seat brace; foam-upholstered ply seat; crescent bolster back pad with rolled ends
- Maker guess
- Unmarked Australian/Danish MCM maker in the Featherston 'Scape' style. Genuine Aristoc/Featherston Scape is NOT supported by the photos: real Scapes have THIN moulded-ply fan/leaf back shells and thin seat pads on tapered frames with screw-in brass feet (confirmed against Nord/Nord Modern dealer photos), whereas this chair has thick rounded cushion, thick rolled crescent bolster pad, flat square-section legs and plain feet. Seller only claims 'steel legs', no maker.
- Maker confidence
- low
- Distinguishing features
- Thick piped/rolled-edge seat cushion (unusually plush for a diner); crescent back pad with curled/rolled tips; flat square steel legs (not the tapered round/flat bar + brass feet of a Scape); diagonal under-seat brace; mustard/gold striped velveteen
- Condition from photos
- Seller says 'good'. Photos show no rips, tears, major stains or obvious rust; fabric pile looks even and age-appropriate; frame finish appears intact with no visible corrosion; seated pad looks unsagged. Floor/backdrop are messy but chair presents well. No label/stamp visible in the four photos provided (listing says 10 photos; only 4 on disk).
- Seller condition grade
- Used - Good
Check in person
- Lift the seat fabric / look under the seat rails for a circular Aristoc label, paper tag, or embossed registration number (e.g. 'ARISTOC / REG. DES....') — this is the whole $45-vs-$450 question
- Leg cross-section and feet: genuine Scape has a tapered frame with screw-in brass/metal levelling feet; this looks like flat square bar with plastic caps — confirm it isn't a reissue or a later copy
- Rock the chair: joint tightness at seat-rail/brazed joints and any movement in the back uprights; feel painted frame underside for rust bloom or over-painting
- Lift the seat cushion edge: is it a thin ply shell (original) or an added foam cushion? Check fabric undersides for dry rot, moths, and whether the striped velveteen is one-generation or a 70s/80s recover
- Ask the seller for the remaining 6 listing photos (page says 10, only 4 saved) — one may already show the underside stamp
Valuation — private sale, QLD market (AUD)
A$40 – A$120A$70+A$25
mid − ask = +A$25 · confidence: medium (as-is valuation); low (attribution)
As photographed this is an unmarked MCM crescent-back dining chair that copies the Scape gesture but not the Scape's construction (thin ply shells, tapered frame, brass feet). A clean, good-condition unlabelled single of this type is worth what singles fetch on QLD marketplace: ~$40-120, mid ~$70 (new generic equivalents ~$115-150; unbranded vintage sets run $400-900/6 per market guide, and singles sell slower so discount applies). It is NOT priced as a Featherston unless provenance appears: marked Aristoc Scape singles have actually transacted at $650/chair (iNVISeDGE 2023) and dealers ask $850.
Upside: If an Aristoc label / Featherston registration stamp is found under the seat AND frame matches Scape specs (tapered frame, brass screw feet), this becomes a marked Scape single: private-sale ~$400-650, i.e. ~10-15x the ask — still discounted vs dealer $850 because singles are slow sellers. If a matching set of partners surfaces, value per chair rises another ~20%.
Evidence summary
4/4 listing photos reviewed directly. Design compared against retrieved images of authentic Aristoc 'Scape' chairs (Nord ref X739 single $850 ask; Nord Modern set-of-6 $2,950 ask) and iNVISeDGE's SOLD $650/chair 2023 consignment — construction mismatch established visually (thin ply fan shell + tapered frame + brass feet vs thick bolster pad + flat square legs). Auction context: Leonard Joel 'Scape' pair estimated A$200-300 (2015, hammer paywalled); Featherston-style/unmarked lookalikes benchmark at $150-500 per market guide — bottom of that band for an unmarked single diner. New licensed Grazia & Co Scape $1,490 (Mar 2023) and new generic velvet singles ~$115-150 bracket the ceiling and floor.
Verdict (BUY): FAIR-TO-VALUE at A$45 — buy as a nice, characterful spare chair or a zero-risk $45 gamble, but do not treat it as the hunt's designer jackpot. Photos contradict a genuine Featherston Scape (thick rolled cushions/bolster pad and flat square legs vs the Scape's thin ply fan shells, tapered frame and brass feet), so the realistic flip is $80-150 after cleaning — a thin $35-100 gross for the listing hassle. The only scenario that changes this is an Aristoc/Featherston stamp under the seat; that check is free, so check it before judging.
Caveats: Only 4 of 10 listed photos available — an underside stamp visible in the missing 6 would upend the attribution. eBay AU sold data and Gumtree dated listings were unfetchable (403), so no same-day AU private single comp; generic-single floor relies on retail prices + market-guide bands, which lowers confidence. Auction hammer for the 2015 Scape pair is paywalled (estimate used, dated). Condition assessed from photos only; fabric age/foam state unverified.
Antique Red Cedar Chest of Drawers Vintage Australian Unrestored
NEGOTIATE
Ask A$180
Identification (from photos)
- Piece
- Chest of drawers (5 drawers: two short over three long), plinth base, approx 95-100 cm H x ~90 cm W (estimated from photos, no dimensions given)
- Style
- Late Victorian / Federation Australian colonial, plain country form - straight front, moulded overhanging cornice, box plinth base (no bun feet, no turned columns)
- Era
- c.1885-1910 (plain plinth-base pattern is the later, mass-market cedar form rather than the early turned-column/bun-foot high-Victorian style)
- Materials
- Claimed Australian red cedar (Toona ciliata). Top shows genuine warm reddish cedar tone under worn polish; fronts are heavily darkened - either a very old heavy stain/dark polish, dye, or a later paint-like overcoat; sides/secondary may be cedar or pine/kauri - cannot confirm from photos
- Maker guess
- Unmarked local colonial/country cabinet-maker; no label, inlay, bobbin work or other markers of a named Sydney/QLD workshop visible
- Maker confidence
- low (no marks visible; plain form is common to many 1890s-1910s workshops)
- Distinguishing features
- Two-over-three drawer layout; plain plinth base; keyhole slots visible; badly mismatched pulls (two pressed-metal/label-type knobs on top row, remaining turned timber knobs of mixed colours/heights - several likely replacements); top surface retains polish with cedar figure visible through heavy scratch/water-ring damage
- Condition from photos
- Unrestored, honest project condition. Top: many surface scratches, water rings, polish wear, edge rubs at front corners (img_3). Fronts: uniformly very dark with scratches and paint-loss marks; drawer gaps uneven, top-left drawer proud/awkward (img_4) suggesting runner wear. Hardware mixed/non-original. No obvious veneer lifting, structural splits or borer frass visible in the four photos, but none can be ruled out; interior, back and runners not shown.
- Seller condition grade
- Used - Good
Check in person
- Borer: tap all feet, plinth skirt and drawer rails; look for fresh frass and exit holes inside drawers and on the backboard - QLD humidity makes old borer common and reinfestation cheap to discount on.
- Finish: scrape a hidden spot (back corner, inside bottom drawer) - is the black an old stain/polish over cedar (strippable, good) or paint (value drops to ~$100-150 as-is)? Confirm top is solid cedar, not veneer (img_3 edge rubs could hide a lifting veneer front edge).
- Drawers: pull all five - original hand-cut dovetails vs later machine/ butted joints; runner wear (top-left drawer already sits proud in img_4); are any drawers replacements; do locks/escutcheons and a key survive?
- Hardware & base: the pulls are visibly mismatched (two metal/label knobs on top row, mixed timber knobs) - count how many are original turned cedar; inspect the plinth base for splits and whether it conceals original turned/bun feet; check carcass corners for old repairs or lost tenons.
Valuation — private sale, QLD market (AUD)
A$150 – A$400A$250+A$70
mid − ask = +A$70 · confidence: moderate - one very close dated sold auction result plus dealer sold/asking tiering; weakened by no sold result for this exact plain small 5-drawer format in private channels, uncertain finish history from photos, and unseen interior/back.
As-is: the nearest genuine sold record is Leonard Joel Sep 2026 - a plain Victorian cedar chest of near-identical scale hammering $160 (est $200-300); plain small cedar chests are the bottom of the category (Carter's median $1,114 reflects bigger, decorated pieces). This example adds negatives: mismatched/non-original pulls, heavily darkened uncertain finish (old stain/polish or possible paint - paint would push value to the $100-150 floor), worn top with water rings, no photos of interior/runners/backboard. It adds positives: appears complete, straight and structurally sound, genuine cedar top with figure, and the $180 ask already prices it as a project. Private-sale as-is band $150-400, mid ~$250. Post-restoration: full strip, polish, new runners, correct turned cedar knobs - dealer-comparable restored cedar chests ask $540-920 (Mr Beams/Bazaa), so realistic private resale after DIY restoration ~$600-900; professional restoration ($800-1,500) would exceed the uplift, so restoration only pencils out if DIY.
Upside: If the dark fronts strip back to sound figured cedar (not paint), drawers are complete and borer-free, restored-and-reeboned value is ~$600-900 private / up to ~$900 dealer-adjacent, i.e. roughly $400-700 gross uplift against the $180 buy - but only for a DIY restorer; after professional restoration cost there is no margin. Best case (bun feet present underneath the plinth skirt, fiddleback fronts, locks + key) is not supported by the photos.
Evidence summary
Photos show a small (est. 90-95 cm wide) plain late-Victorian/Federation Australian cedar chest, 2 short over 3 long drawers, plinth base, heavily darkened fronts, mismatched pulls, worn-but-sound carcass, sold 'unrestored' at $180 after 14 weeks on Marketplace. Retrieved comps: Leonard Joel LJW8615 (10 Sep 2026) plain Victorian cedar chest 90x90 cm SOLD $160 (hammer); Carter's cedar chest sold median $1,114 across 102 auction results (Jul 2026, bigger/decorated pieces); Mr Beams restored c.1880 cedar 7-drawer $825 (out of stock, sibling listings $850-920 several SOLD); Bazaa plain later cedar 7-drawer $540 asking (same page: top cedar $1,922-1,946); Gumtree WA restored colonial cedar c1890 $1,500 asking (undated); eBay AU colonial cedar chests $800 asking x2 (undated). Images: comp_mrbeams.jpg (51 KB JPEG), comp_lawsons.jpg (256 KB JPEG) downloaded; LJ and Bazaa images not served to curl (URLs recorded).
Verdict (NEGOTIATE): Fair, not a steal. The $180 ask is essentially at the as-is market mid ($250) - buy only if you like the piece for yourself and are willing to do the restoration DIY; do not buy as a flip expecting margin.
Caveats: Dimensions/heights estimated from photos - no seller dimensions given; timber attribution to Toona ciliata follows the seller's claim plus visible cedar tone on the top, not independently verified. Leonard Joel $160 is hammer (add ~30% buyer's premium for real buyer cost, which still lands near the ask). Carter's individual hammers are paywalled - only the free median line was used. Gumtree/eBay figures are undated asking prices from search snippets (those platforms block fetching). Finish could be paint, which would invalidate the upside case - this is the single biggest swing factor. Confidence is moderate, not high: one near-exact sold auction comp and one strong sold aggregate, but private-channel sold data for this exact format was unavailable.
Vintage retro matching mid century foot stools
NEGOTIATE
Ask A$80
Identification (from photos)
- Piece
- Matching PAIR of low upholstered rectangular footstools/hassocks (4 tapered legs each; can be pushed together to form one larger square pad)
- Style
- Late mid-century / 1970s retro; colour-block grid (mustard, orange, avocado, cream with black braid lines) shaggy brushed-cotton cover in a Mondrian-ish 70s look
- Era
- Frames likely 1960s-1970s generic Australian/Danish-inspired; covers are NOT original - seller states they 'just placed' vintage-style shaggy fabric over them (recent re-cover)
- Materials
- Light-coloured timber legs (pale, beech/silky-oak appearance, rounded-tapered - NOT dark teak), upholstered pad with fresh shaggy brushed-cotton style fabric and black woven braid seams
- Maker guess
- Unbranded generic MCM production; no labels, marks or maker features visible. Not Parker/Chiswell/Fler level
- Maker confidence
- low
- Distinguishing features
- Genuine matching pair (photos 2-4 show both stools together; listing description says 'price is for the pair'); playful 70s colour-block shaggy fabric is the main selling point; modest size (~45cm wide each vs 60cm floor tiles)
- Condition from photos
- Fabric appears fresh, clean and even, no visible stains or tears; timber legs look sound with no obvious damage; cannot see undersides, joints or foam from photos. Seller lists 'Used - Good'
- Seller condition grade
- Used - Good
Check in person
- Confirm both stools are included and truly matching (same dimensions/height) - description says pair, photos show two; listing mentions 10 photos but only 4 on disk
- Wobble test: grab each stool and rock it - check leg-to-frame joints for looseness/splayed screw-fit legs and any creaks
- Lift and inspect undersides: fabric stapling/sides quality, foam firmness and any sagging, and whether the 'vintage' fabric is genuinely old 70s or a modern reproduction (affects the retro premium)
- Smell/brush the shaggy pile for pet hair, dust and odours; check timber for bore marks or old water stains; look for any maker's label on the frame underside that could lift the tier
- Identify the timber: pale legs look like beech/silky oak, not teak - if they are actually solid teak the low end of my range moves up
Valuation — private sale, QLD market (AUD)
A$60 – A$150A$100+A$20
mid − ask = +A$20 · confidence: medium
Assumption: A$80 buys the MATCHING PAIR (confirmed by photos 2-4 and description 'price is for the pair'). These are unbranded generic MCM frames with a fresh non-original shaggy retro re-cover - fun 70s-revival decor, not collector furniture. Evidence anchors: single generic MCM ottomans ask $75-150 privately (Gumtree VIC), a decorative retro ottoman hammered at A$130 at Lawsons (Jul 2026), while named-maker pairs (Chiswell $780 dealer-sold, Parker $935 dealer-ask) are a different tier that these unmarked stools cannot reach. A matching pair with clean fresh fabric in visible condition should clear $80-120 in Brisbane private resale; $150 only to a styling/decor buyer who loves the look. Recent re-cover in non-original fabric caps collector value (guide's DIY/re-cover multiplier) but the pair format and bold retro look add real appeal.
Upside: Buyer market: shaggy 70s colour-block is trending with stylists. Staged photos of the pair (pushed together as one pad, or one as plant stand) on FB/eBay could clear $120-150 for the pair in a few weeks. Not a dealer-margin piece.
Comparables evidence (5)

Mid Century Teak Parker Footstool Model 120 (vendor: The Design Ark)Bazaa.com.au marketplace (dealer asking, price confirmed in live page JSON)
A$935asking
2026-09-19 (retrieved; collection grid also showed $825 at fetch time)
Ceiling reference only: genuine NAMED MAKER (Parker Model 120), teak, professionally restored, single footstool. Private conversion x0.6-0.7 would be ~$560-650 - applies only to marked Parker pieces, not to unmarked generic stools like this listing
Gumtree Austr…Superb Vintage small round velvet footstool $75 eachGumtree Australia, Mordialloc VIC (private asking; via search snippet)
A$75asking
retrieved 2026-09-19; listing date not shown in snippet
Private asking for a small single vintage footstool in nice fabric - floor-level pricing for small unbranded vintage stools in AU private market
Evidence summary
Photos reviewed (4): matching pair, ~45cm rectangular hassocks on 4 pale tapered legs each, fresh shaggy colour-block cover, good visible condition, no marks visible. Retrieved comps (5): Lawsons auction SOLD A$130 (Space Age ottoman pair-lot style, Jul 2026); iNVISeDGE dealer SOLD A$780 pair (Chiswell, named maker); Bazaa dealer ASK A$935 (Parker Model 120 single, named maker, restored); Gumtree private ASK A$150 (single generic MCM ottoman) and A$75 (single small velvet stool). eBay AU sold data blocked (403) per market guide; Gumtree direct fetch blocked - snippet prices used and flagged. Images downloaded for 3 comps and verified >5KB JPEGs.
Verdict (NEGOTIATE): FAIR (not a bargain flip). A$80 for the pair is roughly at/below the middle of the $60-150 private band - decent value for personal use or a quick restyle flip, but the realistic resale is ~$120-150 for the pair, so net margin is small (~$20-60 before time/effort). Only strong upside is if the pair proves to be a labelled maker or has unusually solid teak frames. Offer $60-70 to build in margin; otherwise buy for enjoyment, not profit.
Caveats: eBay AU sold/completed and Gumtree listing pages block automated fetch, so two comps rely on search-snippet prices (retrieved but not page-verified with dates). No maker marks visible in photos, so attribution is low-confidence and the named-maker comps are ceiling references only. Photos cannot show joints, foam, undersides or fabric quality on edges - condition assumes 'good' as listed. Valuation assumes the pair sells as a pair; singles would clear ~$40-75 each.
Vintage 1950s FLER early cocktail/TV slipper design chair mid century retro for refurb
NEGOTIATE
Ask A$80
Identification (from photos)
- Piece
- Armless low-back cocktail/TV occasional chair (slipper-chair form: upholstered slab seat + separate angled back panel on four splayed tapered timber legs). Seller measures: 48 cm wide, 73 cm high at back — a small single-seat accent chair, not an armchair.
- Style
- Early Australian mid-century modern (c.1950s), pre-1958 Fler-era styling: low slab upholstered planes on boldly raked stick legs
- Era
- c.1950-1958 (early 1950s form per photos; consistent with Fler's early cocktail/TV chair period)
- Materials
- Solid hardwood legs, warm mid-brown stain (could be maple/oak/blackwood/teak — cannot confirm from photos); plywood/timber seat box with hessian+battting and old foam or hair padding under a heavily nubbbed chenille/tweed-style cover
- Maker guess
- Claimed Fler (Furniture & Co / Fred Lowen & Ernest Rodeck, Melbourne). Plausible on form and legs, but NO label, stamp or logo is visible in any of the 4 photos, and the same slab-chair form was made by many 1950s AU factories (Fler, Patrick, Frederick, unclaimed makers).
- Maker confidence
- low
- Distinguishing features
- Fully upholstered rectangular back slab leaning back on a rake; thick upholstered slip seat; four round-to-point tapered legs strongly splayed front-to-back; original nubby chenille-like fabric throughout (looks original, never recovered); underside shows hessian/burlap edged with visible timber ply rail
- Condition from photos
- Project condition. Fabric worn through at both front seat corners exposing orange jute/hessian and white padding (img_2, img_4); fabric generally furred/faded; padding at seat front looks compressed. Legs solid but finish damaged — white scuff/water marks on one leg (img_3); no visible breaks or wobble. Seller states it 'structurally feels strong'. Back panel upholstery looks unworn. Frame joints, springs/webbing, timber species and any underside label NOT visible in photos.
- Seller condition grade
- Used - Fair
Check in person
- Look under the seat, inside the seat box and on the back-rail underside for a Fler paper/foil label, 'Furniture & Co' stamp or any maker's mark — this single detail decides whether the restored value is $250 or $500.
- Rock the chair and check leg-to-seat-box joints and the back-post fixings for cracks, old reglue or wobble; confirm the four legs are original (not replaced) and solid, not hollow/vanity-tapered.
- Peel back the worn corner fabric: identify padding (horsehair vs old foam vs deteriorating rubberised hair — rubberised hair is a $100+ extra job) and check the seat deck for webbing/springs and any wood rot or borer.
- Identify the timber under the leg finish (maple vs teak vs silky oak vs stained softwood) — solid teak/blackwood strengthens the Fler-era story and polish-up potential; stained softwood lowers it.
- Smell/inspect for mould, damp and vermin (chair has been outdoors on pavers in photos) and check the back-panel frame is not the same worn fabric about to fail.
Valuation — private sale, QLD market (AUD)
A$60 – A$150A$100+A$20
mid − ask = +A$20 · confidence: medium for as-is; low-medium for restored-end (attribution unverified, upholstery substructure unseen)
AS-IS: unlabelled early-1950s AU cocktail/slipper chair with fabric worn through — sits at the bottom of the Fler-era slipper/cocktail band ($80-350) and matches the Fler-STYLE (no label) auction hammer of ~$130/chair (LJ Lot 1128) and local $100 re-cover-needed asks. As-is private value $60-150, mid ~$100; the $80 ask is inside that band. RESTORED-END (DIY full re-cover + foam + re-oil legs, ~$150-300 materials and 8-12 hrs labour): an unattributed 1950s AU cocktail chair in nice new fabric sells privately ~$180-350 (mid ~$250); a verified FLER label could push it to ~$300-500, but dealer asks ($675-$950) are not private-realistic for this small unlabelled form. Total project cost $230-380 vs likely private sale $180-350 = roughly break-even, slightly negative unless the label appears or the buyer keeps it.
Upside: Resale upside is thin: even a clean DIY restoration of an UNLABELLED example tops out ~$300-350 private against ~$250-350 all-in cost. The realistic win is a verified FLER label (then $300-500 possible, ~2-4× return) or personal enjoyment. The 'FLER' title alone is not evidence — Fler attribution doubles the ceiling but must be proven by a mark.
Comparables evidence (6)

Antiques to Retro (dealer, Hobart) — 'Mid Century Armchair by Fler, Aus. c.1950'Antiques to Retro dated asking list (web_extract)
A$675asking
page retrieved 19 Sep 2026 (undated listing)
Same maker claim and c.1950 era, but it is an ARMED armchair in presentable condition at dealer level. Dealer ×0.6-0.7 → ~$400-470 private IF a genuinely fine early Fler with arms — a ceiling the subject (armless, re-cover needed, unlabelled) cannot reach.
Evidence summary
Photos: armless 1950s cocktail/slipper chair, 48W×73H cm, hardwood raked tapered legs, original nubby chenille cover worn through at seat front corners; no visible label. Sold evidence: LJW8575 (30 Oct 2025) pair of teak armchairs 'in the style of Fler' SOLD $260 hammer; Lotwatch Fler register: 16 realised results, median A$460, low pairs estimated A$100-200. Asking evidence: Fler c.1950 armchair dealer ask $675 (Antiques to Retro); restored branded FLER TV chair $950 dealer (Bazaa); Brisbane Gumtree re-cover-needed slipper chair $100; eBay AU slipper chair $80 OBO. Market guide band (Fler slipper/cocktail $80-350, refurb at bottom) is consistent with all retrieved data.
Verdict (NEGOTIATE): FAIR, but buy only as a personal-use project — not a resale bargain. A$80 is an honest bottom-of-band entry price for an unlabelled, fully-re-cover-needed chair (auction hammer for Fler-style chairs is ~$130/chair). Offer $60-70; walk away if your plan is flipping after DIY reupholstery, because $80 + $150-300 materials lands at or above what the finished chair will fetch privately. It becomes a good buy ONLY if a Fler label/stamp is present at inspection, or if you want a handsome small TV chair for yourself for ~$300 all-in.
Caveats: Fler attribution unverified — treated as 'in the style of' for as-is value. eBay AU and Gumtree block direct fetch, so those two comps rely on search-snippet prices (undated). No sold price exists for this exact unlabelled form; nearest anchor is the $260/pair Fler-style hammer. Restoration costs assume DIY re-cover; a Brisbane professional re-cover ($400-800) makes the economics clearly negative and would only be justified for a labelled piece. Photos show 4 of the listing's 8 images; remaining photos not available for review.
Mid-Century Parker Nest of Tables Teak Veneer tops and cigar legs
NEGOTIATE
Ask A$90
Identification (from photos)
- Piece
- Nest of two tables (pair, nesting side tables)
- Style
- Mid-century modern, Danish-influenced Australian
- Era
- c.1960s-1970s
- Materials
- Teak-veneered tops on solid timber frames/legs; striped book-match teak veneer clearly visible in top-down photo; no brass, no toggle feet
- Maker guess
- Australian MCM maker, possibly Parker, unverified — treat as generic AU/Danish-style teak veneer nest until a stamp/label is seen
- Maker confidence
- low
- Distinguishing features
- Two tables only (not the 3-piece nests Parker usually made); largest has a square top with straight mitered apron; legs are square-section tapering with rounded arris — NOT bulbous 'cigar' legs and NOT the long low Nordic proportion of known Parker Nordic nests (~90cm L); no Parker-style lip-edge or hardware cues; no paper label or stamp visible in any of the 4 photos
- Condition from photos
- Original finish, honest vintage wear; smaller table noticeably lighter/oranger than the larger (sun-fade or refinishing mismatch); veneer edges look intact at photographed angles; legs appear tight and straight; photo 1 is an AI/staged lifestyle render (rug merges into wall, blended sofa) — real item is photos 2-4 shot on a blue floor
- Seller condition grade
- Used - Good
Check in person
- Look under the largest top and inside the apron/frame for a Parker Furniture paper label or stamp — the entire premium case rests on this; also check for Kalmar/TH Brown/other labels
- Run fingers around all veneer edges and corners for lifting/chips and check tops for water rings/blistering (photos hide edges, especially on the lighter smaller table)
- Wiggle all 8 legs — square taper tenons in these nests loosen often; also check the smaller table's top colour mismatch (sun-fade vs prior partial refinish) is acceptable to you
- Confirm the real item matches photos 2-4: photo 1 is an AI-generated lifestyle render of a cleaner, 2-tone teak set — verify dimensions (~50cm square top) and that no third table exists
Valuation — private sale, QLD market (AUD)
A$60 – A$150A$100+A$10
mid − ask = +A$10 · confidence: medium-high for the generic (unmarked) case; low for any Parker premium until a stamp is seen
As photographed this is a 2-table, unlabelled, original-finish teak veneer nest — in Brisbane private sale that is a $60-150 item (Auction floor: AU small nest lots estimate A$60-80; UK teak nest hammers A$56-131). The $490-950 comparables are RESTORED 3-piece, stamp-confirmed Parker dealer stock and convert to only ~$300-650 private, and apply here ONLY if a Parker stamp is present. Even Parker-confirmed, a 2-table original-finish veneer pair in QLD private hands realistically clears $150-300 (Parker premium on a slow-moving, modest-value category; per market guide small MCM items $150-400 tier). Mid $100 as-is.
Upside: If a Parker label is found: buy at $90, clean + oil the tops (~$30 DIY) and resell for $220-350 — margin $100-230 but expect 2-4+ months; nest of tables sell slowly and are a low-ticket, low-margin category. Without a stamp, resale is $100-180 at best — no meaningful margin.
Comparables evidence (5)

Parker Teak Nesting Table Trio Coffee Side Tables — Retro Bay (Sydney dealer)retrobay.com.au/products/parker-teak-nesting-table-trio-coffee-side-tables
A$490asking
Sep 2026 (retrieved 19 Sep 2026)
Named Parker teak nesting trio; product page retrieved shows embedded price $490 with Sold Out status, while Retro Bay's /collections/tables page the same month lists the same title at $790. Dealer-restored 3-piece Parker benchmark; convert x0.6-0.7 to private.

Parker Nest of Tables in Teak — Grandfather's Axe (Collingwood VIC dealer)grandfathersaxe.com.au/products/danish-nest-of-tables-in-teak
A$950asking
retrieved 19 Sep 2026 (page live; marked Sold Out)
Genuine Parker Aust. 1960s nest of three, fully restored, 630mm largest — asking $950 at top-end dealer. Restored dealer ceiling for the category; our piece is a 2-table, unrestored, unmarked set, several tiers below.
findartinfo.c…Teak nest of two side tables by Parker — Lawsons Furniture & Interiors, Sydney, Lot 1039findartinfo.com (Lawsons auction record)
A$70asking
auction 22 Feb 2024, lot sold but hammer is member-only; price_aud is the public pre-sale estimate midpoint (A$60-80)
Closest format match: a nest of TWO teak side tables attributed Parker at AU auction, 40x46x34cm. Auction estimate band A$60-80 shows the trade floor for small Parker-attributed 2-table nests — a stamped AU Parker nest still only estimates this high at auction.
Evidence summary
5 retrieved comparables: AU dealer asks for stamp-confirmed, restored Parker nests $490-950 (Retro Bay Sep 2026, Grandfather's Axe, Tangerine & Teal with Sold-listing); AU auction estimate A$60-80 for a Parker-attributed 2-table teak nest (Lawsons Feb 2024); UK sold hammers £30-£70 for labelled teak nests incl. Parker Knoll £60 Jul 2026 (AUD spot 1.8741, 18 Sep 2026). Photos 2-4 show a square-legged, unlabelled 2-table veneer nest with matched veneer tops; no Parker cues. Astton Vintage sold a Parker Nordic nest (price undisclosed) — supports rarity of the genuine Nordic model, not present here.
Verdict (NEGOTIATE): Fair, not a bargain as claimed — buy at $50-70 if you like them, stretch to $90 ONLY if you verify a Parker stamp/label in person. The 'Parker' and 'cigar legs' claims are both unsupported by the photos (square tapered legs, no stamp, 2-piece set vs Parker's usual 3).
Caveats: Lawsons hammer prices for the Parker lot are member-only — only the A$60-80 estimate is public. eBay AU sold data inaccessible (403) per market guide. Retro Bay's live product page JSON shows $490 while their collection page shows $790 for the same title; both retrieved 19 Sep 2026, discrepancy noted rather than resolved. Maker attribution unverifiable from photos; location is approximate per the listing.
Vintage MCM Sideboard
NEGOTIATE
Ask A$400
Identification (from photos)
- Piece
- Sideboard / buffet — 4 drawers bank left, 2 cupboard doors right
- Style
- Transitional late Art Deco to early mid-century; rounded bullnose corners and edge, skirted base with cut-out stretchers and short turned/splayed legs — an Australiana form, not sharp-edged Danish 1960s
- Era
- c. 1948–1958 (rounded-corner transitional styling predates classic 1960s MCM)
- Materials
- Silky-oak-tone veneered carcass with likely solid silky oak or fruitwood drawer fronts and trim; finish is a light honey/orange shellac-or-varnish that has dried out. Not classic brown Danish teak.
- Maker guess
- Unbranded Australian-made (possibly a local Queensland/NSW factory in the Rosenstengel/Hardy-family vein); no label visible
- Maker confidence
- low
- Distinguishing features
- 160W x 45D x 81H cm full size; rounded wrap-over corners; matching dark bakelite/composition round pulls on all drawers and doors (appear original and complete); original legs and stretcher base intact
- Condition from photos
- Fair/project, matching seller's 'needs some love'. Top is the worst area: large dry, faded, finish-worn patch across the rear two-thirds (img_3) with edge wear along the front bullnose. Front drawer faces show scattered scuffs/scratches and finish breakdown; drawer fronts look slightly sun-faded unevenly. Doors look flush, gaps uneven at bottom rail (img_1) — possible slight sag. No obvious veneer lifting, blistering or missing chips visible, but corner-wrap veneer edges are high-wear zones and need hands-on check. Legs scuffed but no breakage visible. Hardware complete.
- Seller condition grade
- Used - Fair
Check in person
- Run a fingernail along the rounded corner-wrap veneer and the top's front bullnose — any lifting/chipping there doubles the repair bill and kills the price.
- Lift each drawer out: check runners for breakage/wood-block replacements, and look inside for a maker's stamp/label (could move it out of generic territory).
- Pour-test hidden interior shelf with a damp cloth and smell for mustiness; check the bare top's extent under raking light — a full strip-and-relacquer is 8–12 hrs labour.
- Wiggle all four legs and the cut-out stretcher base (old glue joints fail here) and open/close both doors to check sag, alignment and whether hinges are original.
- Confirm the rear panel and interior finish on photos-less areas; sun damage is usually worst at the back if it sat by a window.
Valuation — private sale, QLD market (AUD)
A$250 – A$600A$400+A$0
mid − ask = +A$0 · confidence: medium
This is a real full-size (160 cm) sideboard, but it is the wrong timber story (silky-oak-tone, not brown Danish teak), the wrong era look (rounded 1950s transitional, not sharp 60s Danish), and the seller prices it honestly as a project: top finish is largely gone and fronts are scuffed. Four retrieved auction SOLD results for plain mid-size/worn MCM sideboards hammer at A$325–700 (buyer cost ~A$410–910 with premium); the 2026 Cressy A$700 is the fashionable ceiling. Auction hammer ≈ trade value; private asking with visible project work typically lands A$300–600 in QLD for this look. Market guide silky-oak band $300–1,000 and project multiplier ×0.25–0.4 of the $700–2,000 teak band both land in the same place: about $250–600, mid $400. Refinish DIY costs ~$150–300 in time/materials — that discount is already embedded in A$400.
Upside: Not the underpriced teak bargain the $400 price suggests — it reads as an entry-level, project-condition silky-oak piece. Modest trade exists only for a DIY refinisher: buy near A$300–350, re-lacquer the top and fronts (~$200 DIY), and a refreshed 160 cm sideboard should retail privately A$700–1,000 in Brisbane's market. That is ~A$200–400 net upside for real labour — worth taking only if you refinish anyway, not a flip.
Comparables evidence (5)

Cressy mid-century elevated six-drawer sideboard (69H x 151W x 48D cm)Lawsons Auctioneers, Sydney (lot page verified by direct fetch)
A$700sold
2026-08-06
Closest and most current comp: same 150–160 cm width plain MCM sideboard, unglamorous maker. Hammer A$700 (est A$400–600) = ~A$875–910 with buyer's premium. Elevated six-drawer form is more on-trend than this rounded-corner piece, so it is a ceiling, not a floor.
Gumtree Austr…1930s Art Deco silky oak sideboard, 150W x 50D x 97H cm, removable glass topGumtree Australia, Coffs Harbour NSW (search snippet with price)
A$650asking
undated listing (live Sep 2026 search)
Same silky-oak timber and similar 150 cm width but better-condition Art Deco with mirror/glass — its $650 asking caps what a project silky-oak piece should ask; listing page fetch-blocked (snippet evidence).
Evidence summary
3 listing photos reviewed at full detail. Ask A$400 vs retrieved comps: Lawsons SOLD A$700 (2026, 151 cm Cressy — ceiling), SOLD A$325 (2025, 150 cm plain), SOLD A$450 (2022, 276 cm named-maker veneered with chips), SOLD A$425 (2021, damaged legs); Gumtree silky-oak asking $650 (better condition, caps the band). Auction hammer +25–30% premium per market guide; project condition multiplier applied. 4/4 sold comps verified by direct curl of lot pages (Sold: figure parsed from HTML), 4 images downloaded.
Verdict (NEGOTIATE): fair
Caveats: Timber identified from photos only — silky oak vs light teak vs a teak-veneer over oak carcass changes the ceiling; a teak stamp would push value toward the $700–1,200 private band. Auction hammers exclude ~25–30% buyer's premium and are Sydney, not Brisbane. 'Fair' assumes drawers/veneer/base are structurally sound as they appear; any runner replacement or corner-veneer regluing tips this to likely overpriced. No internal/label/rear photos exist.
Mid Century Modern Burgess Teak Display Drinks Cabinet
NEGOTIATE
Ask A$490
Identification (from photos)
- Piece
- Free-standing double-sided MCM display/drinks cabinet (room-divider type): glass-door ends with arched/ogee glass, central open shelving over a drop-down (fall-front) door, adjustable glass shelves
- Style
- Mid-century modern, Danish-influenced Australian production
- Era
- c.1965-1975
- Materials
- Teak and teak veneer on substrate; clear glass shelves; glass door panels (arched cut); internal light per seller
- Maker guess
- Burgess Furniture (Preston, Melbourne) — claimed by seller
- Maker confidence
- medium
- Distinguishing features
- 1785L x 325D x 1180H double-sided layout; both end doors fully glazed with distinctive arched-top glass; finished on both faces so it works as a room divider; moulded/stepped frame profiles; drop-front central cabinet. No cat's-eye handles or maker's stamp visible in the 4 photos — the arched glass and double-sided drink-cabinet form match Burgess/contemporary AU suite furniture rather than the classic Parker-style cat's-eye sideboard cues.
- Condition from photos
- Good original condition: warm even teak colour, no visible veneer lifts, cracks or water damage; glass shelves present and seated; hinges look original and complete; drop-front panel flush. Photos do not show: stamp/label, internal light working, drop-door mechanism, top surface in close-up.
- Seller condition grade
- Used - Good
Check in person
- Look for the Burgess stamp/label (inside top drawer or drop-front compartment, back panel) and any S1 Furniture Maker's Mark — no cat's-eye handles or label are visible in the photos, so 'Burgess' is currently unverified and drives the top of the range.
- Glass: all adjustable shelves present and chip-free; whether the end doors are genuinely curved/cat's-eye glass (premium) or flat arched-cut glass; mirrored backing present and not desilvered on each side.
- Internal light works (wiring/safety — 1970s AU wiring may need retermination); drop-down door hinges/stays smooth and stay open.
- Veneer and base: no delamination or water damage along the shallow 325mm-deep plinth/base rails; feet/plinth solid; top close-up for ring marks or finish loss not visible in photos.
Valuation — private sale, QLD market (AUD)
A$350 – A$650A$480−A$10
mid − ask = −A$10 · confidence: medium — condition reads good in 4 photos and the category anchor is solid (one Burgess drinks-cabinet sold), but no second independent Burgess drinks-cabinet sold was retrievable (the two $450/$495 comps look like the same physical piece), the maker's stamp is not visible in the photos, and eBay AU sold data was inaccessible (403).
Direct type anchor: a Burgess teak cocktail/drinks cabinet (dealer platform) SOLD $450 and was asked $495. This piece is the larger, more useful double-sided room-divider variant (1785L vs 905W) with working light and full glass-shelf set, in good original condition — worth at or a touch over that anchor. Named-maker (if stamped) Burgess drinks cabinets remain a niche: the $1,895 Burgess sold and $2,499 Burgess ask are cat's-eye SIDEBOARDS, a different, more collectible form — do not apply. Unattributed teak cabinetry at auction clears $400-700 (Leonard Joel 2024-2026), and generic private-display cabinets on Gumtree list $50-250, so the floor is protected mainly by the Burgess name + double-sided appeal. QLD private-sale, Sep 2026: $350-650, mid ~$480.
Upside: Thin flip margin at full ask. Realistic resale is A$550-700 (presentation, photos, Brisbane MCM demand for room-divider pieces), i.e. ~A$100-200 gross only if bought at ~A$440-470. A confirmed Burgess stamp + working light and intact mirrors pushes resale toward the A$700 end; no stamp drops it toward generic-teak territory (A$300-400).
Evidence summary
Photos show a good-condition teak double-sided display/drinks cabinet with arched glass end doors, central open shelf, drop-front compartment, glass shelves intact. Retrieved comps (19 Sep 2026): Burgess cocktail drinks cabinet SOLD $450 (Collecte) / asked $495 (David Calleja Trading, same piece); Burgess sideboard SOLD $1,895 2023 (iNVISeDGE, cat's-eye form); Burgess sideboard sold $389 (Masterfind); generic teak sideboard SOLD $700 LJ 12/2/2026; Burgess cat's-eye sideboard dealer ask $2,499 Jan 2024 (The Vintage Eye). One comp image downloaded (comp1.jpg). Market guide: Burgess = recognised AU maker, undervalued vs Parker; dealer-to-private x0.6-0.7.
Verdict (NEGOTIATE): FAIR — the A$490 ask sits almost exactly on the private-sale mid (~$480) and just above the only retrieved Burgess drinks-cabinet sold ($450). Not a bargain, not rich; open at A$400-430 and settle ~A$440-470.
Caveats: Maker attribution rests on the seller's claim — no stamp or cat's-eye hardware visible in the 4 photos; if unmarked, treat as quality generic AU teak and value $300-450. The two Burgess drinks-cabinet comps likely represent one physical item, so the type sample is thin (effective n=1 sold). eBay AU sold/complete data blocked (403); Gumtree listing pages blocked — dated private asks for AU display cabinets relied on auction houses instead. Listing photos are from what looks like a dealer/warehouse setting — seller may be a trade reseller, which explains a firm ask at fair value.
2x Fler Solid Teak Lounge Chairs - Vintage - Excellent Condition for 54 years old! Pick Up Cleveland
NEGOTIATE
Ask A$400


Identification (from photos)
- Piece
- High-back lounge/armchair pair (claimed) with loose seat cushion and loose two-button tufted back cushion on a squared hardwood frame with wide flat plank armrests
- Style
- Australian mid-century modern, rustic/geometric late-MCM (1970s) vernacular; Danish-influenced but not a recognised designer form
- Era
- c.1968-1975 (seller claims 54 years = 1972, consistent with the blocky form)
- Materials
- Medium honey-tone hardwood claimed 'solid teak' — visually a straight-grained teak-tone hardwood; Fler frequently used coachwood/maple/Tasmanian oak with teak-look finishes, so 'solid teak' is unverified and questionable. Coarse beige basketweave upholstery, likely original 1970s cloth.
- Maker guess
- Fler (claimed) — NOT corroborated by the photos. The form matches NO documented Fler line: SC55 is a low metal-framed chair with clad timber, SC58 is lower-slung, Narvik has sculpted curved 'wing' arm paddles, Flerena is a swivel, Karinga has thin curved arms. These chairs have thick straight plank arms and stubby square legs — a generic AU/Danish-style 1970s lounge chair, possibly Parker/TH Brown-adjacent. No label visible in either photo.
- Maker confidence
- low
- Distinguishing features
- Squared stub legs; wide flat top armrests mitred to the legs; loose boxy seat cushion; separate loose back cushion with two self-covered buttons; a folded cloth throw draped over the back top (decorative, not an original headrest)
- Condition from photos
- Both photos show identical room and an identical-looking chair — likely the SAME chair shot twice; no photo shows two chairs together, so the pair's existence is NOT photo-confirmed. Fabric: original-looking coarse weave, general fading/soiling; clear fraying and loose threads along the seat-cushion front seam and a small pull/snag on the seat top; back cushion appears sound. Timber: armrest tops worn/light-bleached with a dark burn-or-scuff mark on one arm (img_2 left arm); no obvious structural cracks visible; joints not visible from these angles. No screws/bolts or maker label visible.
- Seller condition grade
- Used - Good
Check in person
- BOTH chairs physically present and matching — no listing photo shows two chairs together; verify they are a genuine pair, not one chair photographed twice
- Fler label/paper stamp/paint stamp on the underside or rail — without it the 'Fler' premium does not exist (form matches no known Fler model)
- Joint integrity: grab each armrest and leg, check for wobble/gaps at the arm-to-leg mitres, and lift-test; also look under the seat cushions for screw heads rubbing fabric from inside (a known wear path on this style)
- Fabric truth: how far the seat-cushion edge fraying extends, cushion underside wear, foam/latex condition (powdered latex = refoam cost), and whether the beige weave is original (probably yes — fading consistent)
- Timber reality: end-grain at leg feet and arm mitres to confirm solid timber vs veneer; identify teak vs coachwood/oak; check the burn/scuff mark on the armrest top and whether finish is worn through
- Reupholstery math: if fabric is within ~1 year of recovery, deduct $300-600 per chair from any offer
Valuation — private sale, QLD market (AUD)
A$250 – A$550A$380−A$20
mid − ask = −A$20 · confidence: low-medium — 2 photos, both apparently the same chair, no maker mark, model form undocumented
If genuinely Fler, a standard (non-designer) Fler armchair sits in the $200-500 each / pair $400-1,200 market-guide band — but every retrieved evidence line pulls the LOWER half: a labelled Fler pair dealer-asks $300 (Ruby Room), a Fler-attributed worn pair asks $250 (Gumtree), and an auction Fler-STYLE pair estimated $400-500 went UNSOLD, while the only strong SOLD pairs ($800 Narvik, $1,495 Fleroto, $1,350 SC55 2014) are documented iconic models in excellent/restored state. Our chairs: no visible label, non-Fler-looking form, frayed original fabric, worn armrest finish, and the photos likely show ONE chair twice. Private-sale pair value in visible condition: $250-550, mid ~$380. If a Fler label and a matching second chair are confirmed and joints are tight, value moves toward $450-550; if either chair has joint movement or fabric needs recovery within a year, value is $250-300 after $300-600/chair reupholstery risk.
Upside: Thin-to-negative as listed. Realistic flip: buy at $300-350 (negotiated), clean + re-oil timber + refoam cushions (~$150-250/chair DIY-ish), resell pair $600-800 as '1970s Danish-style teak loungers' → $150-300 profit, hours of work and a 2-6 month hold. If full reupholstery is triggered ($300-600/chair) the margin disappears. Only real upside: a Fler label/stamp appearing in person would re-anchor at $500-800 private pair with minimal work.
Evidence summary
Photos (2, likely same chair twice, same room): beige basketweave lounge chair, wide plank teak-tone arms, two-button loose back cushion, frayed seat front seam, worn/bleached arm tops with one burn mark, no label. Comps retrieved 19 Sep 2026: LJ Narvik pair SOLD $800 (14 Aug 2025, designer-model ceiling); iNVISeDGE Fleroto pair SOLD $1,495 (iconic, original); iNVISeDGE SC55 pair sold $1,350 in 2014 (context); Ruby Room labelled Fler pair ASK $300; Gumtree Fler-attributed pair ASK $250; LJ Fler-style pair UNSOLD at $400-500 est.; Bazaa restored Fler single ASK $950. Market guide: standard Fler armchair private $200-500 each, pair $400-1,200.
Verdict (NEGOTIATE): NOT a bargain — pay-up-to $300-350 for the pair, walk at $400+. The 'Fler' attribution is unsupported by the photos (form matches no documented Fler model), the frayed seat-cushion edges contradict 'excellent condition', and no photo proves two chairs exist. If inspection confirms Fler labels, a second matching chair, tight joints and solid teak, $400 is fair-ish (pair band $400-1,200) but still not cheap for this fabric and finish.
Caveats: eBay AU sold listings and Gumtree listing pages are fetch-blocked (403) — Gumtree/Gumtree-style comps are search snippets, undated. The findartinfo record of a Fler teak pair (LJ, 31 Jul 2025, est. $400-500, reported sold) has a members-only hammer and is excluded from the valuation set. Leonard Joel Narvik lot images are from the catalogue CDN; hammer price read from the catalogue's embedded lot JSON (priceResult 800 vs estimate 800-1200). Seller age/brand/material claims all unverified. Listing is 5 weeks old and unsold — market has already rejected $400/$250-per-chair.
✨ RARE & BEAUTIFUL VINTAGE/ANTIQUE SIDEBOARD ORNATE SOLID TIMBER GLASS SLIDERS $280 ✨
NEGOTIATE
Ask A$280
Identification (from photos)
- Piece
- Low box-form buffet/sideboard with built-in glazed display gallery (sliding glass front), 3 central drawers flanked by 2 carved doors, approx 1.4-1.6 m wide, ~1 m high
- Style
- Tudor/Elizabethan-revival 'Old English' ornate style - stylised ogee arches with fan/feather motifs on door panels, small carved pilasters flanking the glazed gallery, moulded bullnose top. This is a 20th-century perpetuation of the 'Jacobean/Tudor oak buffet' fashion, NOT genuine Arts & Crafts, Victorian, or mid-century modern
- Era
- c.1940s-1960s reproduction in an older style; the ribbed, aerodynamic drawer pulls are late-Deco/utilitarian of the 1940s-50s and the shallow, uniform carving reads machine/router-work. 'ANTIQUE' claim not supported by photos - likely ~60-80 years old, not 100+
- Materials
- Dark-stained hardwood - appearance consistent with stained oak (possibly a QLD hardwood such as silky oak under heavy stain); close-ups show fine straight grain on drawer fronts that may be veneer over a softwood/pine carcass. Seller's 'solid timber' claim unverified
- Maker guess
- Unattributed mass-produced piece, Australian or UK import (Tudor-revival buffets were made in quantity by both); no label visible
- Maker confidence
- low
- Distinguishing features
- Integral glazed display niche along the top front with glass sliders (the 'gliders'); shallow stylised fan-and-ogee carving on door and end panels that looks routed rather than hand-cut; rounded moulded top edge; small trefoil metal keyhole escutcheons; ribbed moulded drawer pulls; dark even lacquer finish
- Condition from photos
- Good used condition consistent with seller's 'Used - Good': no visible breaks or major damage; some crazing/faint water marks on the centre drawer fronts; finish looks original or an old varnish rather than recent; glass sliders present. Carcass square in the photos. Interior, back panel and underside not shown
- Seller condition grade
- Used - Good
Check in person
- Timber truth: look under the top edge, inside drawers and at the back for solid boards vs veneer over pine/softwood carcass; confirm species (stained oak vs silky oak vs cedar) - the whole 'solid timber ornate' premium depends on it
- Carving depth and tool marks: hand-cut faceting and crisp through-carving on pilasters would point pre-1920 English and lift value; uniform shallow routed lines confirm 1940s-60s repro (as suspected)
- Joinery: dovetailed drawer boxes and pegged/tenoned frame construction vs screws and machine-cut joints; any maker's label or paper label on the back
- Glass sliders run smoothly on original tracks, glass original (craziness/wobble marks), plus a tap-test of lower panels and undersides for borer - common in old QLD hardwood
- Confirm the displayed dolls/ceramics are NOT included; negotiate clearance of the painted finish - a re-polish adds cost if the dark lacquer is tired or DIY-stripped
Valuation — private sale, QLD market (AUD)
A$150 – A$350A$250−A$30
mid − ask = −A$30 · confidence: medium
This is an ornate Tudor/Elizabethan-revival style buffet, almost certainly a mid-20th-century reproduction rather than an antique, and it sits in the weakest corner of the second-hand market. AU auction evidence (Lawsons A$425 and A$600 hammers for genuinely older carved buffets, incl. 25% BP on top; LJ A$300 for generic MCM) plus UK clearance results (£70-£180 hammers, A$131-337) bracket what non-designer ornate sideboards actually realise. Local dealer anchor: Brisbane's DeYoungs asks A$195 for an ornate carved cedar repro. Condition looks honest and complete (glazed sliders intact, no visible damage), so mid-band, but a private QLD buyer pool for this 'nan's dining room' style is thin and removal (heavy, stairs-free?) costs $80-150. A$150-350 private-sale, mid A$250, in visible condition. If hands-on inspection proved an early-1900s English solid-oak hand-carved piece the band would lift toward A$500-900, but the photos argue against it.
Upside: No flip margin: even bought at A$200, realistic resale after cleaning and styling in the Brisbane colonial/vintage-décor niche is A$300-400, which a ute hire and weekend would eat. The only genuine upside is a surprise label/early-English construction on inspection, which photos make unlikely.
Evidence summary
6 comparables retrieved 19-Sep-2026: AU auction sold - Lawsons carved walnut buffet A$600 (18-Sep-2025), Lawsons C19th sideboard A$425 (12-Sep-2025), Leonard Joel generic teak sideboard A$300 (May-2024); UK sold hammer converted at GBP/AUD 1.8741 (ECB, 18-Sep-2026) - Kinghams A&C glazed carved oak sideboard £180≈A$337 (Dec-2024), Denhams carved oak buffet £70≈A$131 (Aug-2026); AU dated dealer asking - DeYoungs Brisbane ornate carved cedar repro A$195 (live Sep-2026). All ornate/carved sideboards cluster A$130-600 sold with A$195-600 asking. Photos show shallow uniform (likely machine) carving, 1940s-50s ribbed pulls and integral glazed gallery - consistent with a mid-century Tudor-revival reproduction, not a genuine antique. No mid-century-modern market band applies (see _market_guide.md; MCM teak/Parker bands are for a different furniture class).
Verdict (NEGOTIATE): Fair, not underpriced - haggling item. The A$280 ask sits at the top of the honest A$150-350 private range (mid A$250). 'RARE & ANTIQUE' claims are not supported: this reads as a c.1950s ornate repro, a style that clears at A$130-430 at auction. Offer A$200-240; paying over ~A$280 is above market. Only buy if the buyer loves the look - there is no resale margin.
Caveats: ['Photos only: timber species, solid-vs-veneer, joinery, back panel and borer status unverified; identification confidence for exact dating is moderate', 'UK results are hammer prices (add ~20-30% buyer premium for what a buyer paid) and UK ornate-oak clearance prices are softer than AU private asking prices; they were used as floor evidence only', 'eBay AU sold/completed and Gumtree listing pages block automated retrieval (403), so no AU sold-listing comps from those sources; Lawsons/LJ lot pages were fetched directly', 'GBP→AUD rate 1.8741 taken from Frankfurter/ECB 2026-09-18; conversion of UK hammers is indicative', "Seller claims ('RARE', 'ANTIQUE', 'SOLID TIMBER') are unverified marketing; nothing here reflects the piece being inspected in person"]
Restored Retro MCM 1960s Lowline Credenza / TV Unit / Sideboard Rare Black Enamel & Chrome Trim
NEGOTIATE
Ask A$550
Identification (from photos)
- Piece
- Lowline dresser / credenza configured as a TV-sideboard: long low 8-drawer bank (3 small top drawers with round knobs, 3 wide + 2 wide below with bar pulls), no cupboards
- Style
- Australian MCM / late 'Atomic Era' bedroom-suite styling (chrome edging, wraparound curves) rather than teak-buffet styling
- Era
- c. 1955-1965 (chrome trim with inset enamel stripe, cigar legs with metal shoes and embossed knobs read late-50s/early-60s; seller's '1960s' broadly right but likely early)
- Materials
- Highly figured honey-toned veneer drawer fronts and book-matched top (flooded/tiger maple or myrtle-type figure); stained solid-timber edge banding and frame; tapered hardwood legs with small metal ferrules; bright/chrome edge trim with a thin black inset stripe; chrome bar pulls and embossed medallion knobs. Substrate (solid vs particleboard) not visible in photos.
- Maker guess
- Unmarked Australian suite maker of the Herron / Sylvanite / Alrob tier (Sydney-Melbourne bedroom-suite factories that used chrome + enamel trim). No label, stamp or mark visible in the 4 photos.
- Maker confidence
- low
- Distinguishing features
- Wraparound curved side panels; sloped/stepped drawer profile; factory chrome edge trim carrying a narrow black enamel stripe; embossed concentric-medallion knobs; splayed cigar legs with metal foot caps
- Condition from photos
- Presented very good after strip-and-reoil (seller states Scandinavian oil shell + teak-oiled fronts, consistent with the even high sheen and fresh look). Chrome trim appears clean and un-dented; no veneer lifts, overspray or paint edges visible; a couple of small light marks/scuffs on lower drawer fronts (img_3). Refinishing is competent but recent — oil finish may still be curing. Photos cannot show underside, labels, substrate, interior, or drawer runners.
- Seller condition grade
- Used - like new
Check in person
- Black stripe in the chrome channel: original baked enamel or later paint/black-silicone touched in during the restoration? Look for brush marks, overspray on the chrome, or stripe that lifts with a fingernail.
- Turn it over: any maker's label/stencil/date (Herron, Sylvanite, Alrob, Parker tier)? Substrate on underside/back — solid timber/Herronply vs particleboard (the curved side wraps are the veneer-risk areas).
- Chrome trim: pitting/rust bloom under the brightwork, sprung or re-glued corners, missing clips; confirm the trim is one piece per run and wasn't removed for the refinish (fresh adhesive or bent returns reveal it).
- Drawers: run all 8, check runners for wood screws/splitting and alignment of the stepped fronts; inspect veneer edges of drawer fronts and the embossed knob stems; sniff the top — uncured oil means the refin is days-old, not months.
Valuation — private sale, QLD market (AUD)
A$380 – A$650A$500−A$50
mid − ask = −A$50 · confidence: medium
Framing that applies: refinished (oiled) original-look AU lowline dresser with period chrome + black enamel stripe trim — NOT a black custom conversion (photos show natural timber throughout). Anchors: AU auction floor for anonymous 60s low case pieces ≈ $300-390 sold (LJ 2024, AAG 2024); dealer restored/painted lowline tier $750-800 asking → $450-525 private (Upcycld, Bazaa); $550-650 private is where a genuinely nice, well-restored unmarked lowline with intact period chrome trim trades on FB Marketplace in QLD. Lowline demand is steady (TV-unit utility), and the visible restoration quality is good, supporting the mid; the unknown maker, niche atomic styling (chrome trim reads 1950s, less fashionable than teak), refinish discount (x0.9) and the fact the seller is already down from ~$800 (price-drop snippet) cap the top. If any photo had shown a black shell the value would be the same or slightly lower (~$400-550) as custom paint sells at/below original-condition equivalents.
Upside: No meaningful margin at $550 — mid ($500) minus ask is negative. Seller already price-dropped from ~$800 (FB search snippet shows same title 'Price drop A$800', Sunshine Coast QLD), so $550 is a marked-down but honest ask. Buyer strategy: offer $450-480 cash-collect; walk above ~$550 unless a maker's label or exceptional chrome/enamel originality pushes it up. If the buyer's goal is a black media unit, this listing does not deliver that look — the black is only a pinstripe.
Comparables evidence (6)

Mid-Century Modern Teak Low Credenza or Desk — Austin Auction GalleryAustin Auction Gallery lot page (retrieved HTML)
A$387sold
2024-07-12
US auction, low teak credenza/desk of similar lowline format; hammered US$275 excl BP (est. $300-500), converted at 1.406 AUD/USD (open.er-api.com, 18 Sep 2026). International floor check: unmarked lowline credenzas clear in the low hundreds.

Blue mid century lowline cabinet / dresser (150cm, 6 drawers, pro spray-finish restoration)Upcycld (Melbourne dealer specialising in restored/repainted MCM) — product page extracted
A$750asking
current listing, Sep 2026 (Sold Out status)
Direct comparable for the 'custom restoration' framing: 150cm 6-drawer AU lowline dresser, professionally sprayed in colour. Dealer ask $750 → private-equivalent ~$450-525 (x0.6-0.7). Shows custom-paint lowlines do NOT clear high prices privately.
Upcycld produ…'Alrob Furniture' teal/green 9-drawer lowline dresser, 1960s AU, transformed (painted) finishUpcycld product page (.js JSON retrieved: price 140000, available false)
A$1,400asking
current listing, Sep 2026 (sold out)
Custom-colour conversion of a 1960s AU branded (Alrob) 9-drawer lowline dresser, 173cm. Dealer ask $1,400 reflects brand name + big-workshop overheads; ×0.6-0.7 → $840-980 private-equivalent — the CEILING for a restored lowline, and it needs a named maker to get there.
Retro Bay (de…Mid Century Teak Dresser Drawers Low Boy Sideboard (136w, 9 drawers, AU-made c.1970s, original finish)Retro Bay (dealer) product page (.js: price 159000; Sold Out)
A$1,590asking
Sep 2026
Upper reference for the ORIGINAL-look framing: dealer price for a very good original-finish AU teak low boy (trending category) $1,590 → private-equivalent ≈ $1,000-1,100 — what a top-condition named-maker teak lowline fetches; our piece is below this on maker fame, era-trend (chrome/atomic vs teak) and because it is refinished.
Evidence summary
Photos show an 8-drawer ~1.6m AU MCM lowline dresser, highly figured honey veneer, wraparound curved sides, period chrome edge trim with thin black enamel stripe, embossed knobs, cigar legs — recently stripped and oil-refinished to very good presentation; NOT a black-painted conversion despite the title. Retrieved comps: SOLD A$300 Leonard Joel 16 May 2024 (AU 1960s/70s teak sideboard 152cm, lot 1262 — parsed from live LJ catalogue); SOLD ≈A$387 (US$275) Austin Auction Gallery 12 Jul 2024 teak low credenza (HTML retrieved, FX 1.406 open.er-api.com 18 Sep 2026); dealer asking: Upcycld painted lowline $750 (sold out), Upcycld Alrob painted 9-drawer lowline $1,400 (.js retrieved), Bazaa restored MCM sideboards $800-2,500, Retro Bay original teak low boy $1,590 (sold out). Same listing appeared in a FB Sunshine Coast search snippet at 'Price drop. A$800' (facebook.com/marketplace/sunshinecoast/sideboards/), i.e. $550 is already a reduction. Market guide private bands (generic Danish/AU sideboard $700-2,000 private; refinished unmarked at bottom; custom-paint ≤ original equivalents) applied.
Verdict (NEGOTIATE): fair
Caveats: Only 4 of the listing's 10 photos were on disk — interior, back, labels and any further detail unseen; maker unknown (low confidence attribution); listing metadata shows a scrape artifact 'price_on_page: A$55' — asking taken as A$550 per listing record; two of six comps are international (converted at live FX); eBay AU sold data unavailable (403 to automation) so sold evidence rests on two auction lots; Retro Bay/Upcycld sold-out statuses confirm asks, not hammer prices.
Vintage 1960’s Don Rex 3-Seater Lounge Sofa. Pair Chairs also AVAIL. Fler Parker era. BRISBANE
NEGOTIATE
Ask A$1,400
Identification (from photos)
- Piece
- 3-seater lounge sofa with exposed show-frame (listing also offers a matching pair of lounge armchairs as a separate purchase)
- Style
- Mid-century modern, Danish-influenced Australian make; sculptural exposed timber show-frame with loose seat/back cushions and upholstered panel arms
- Era
- Late 1960s (consistent with Don Rex output c.1965-70)
- Materials
- Exposed hardwood show-frame (Don Rex typically used silky oak/brushbox-style AU hardwoods or teak - timber type not confirmable from photos), blue textured textile upholstery, likely recently re-covered
- Maker guess
- Don Rex Furniture, Brisbane (attributed by seller; consistent with iNVISeDGE, the Brisbane MCM specialist that has handled this exact design and photo-staged identical sets at the same white-corrugated-iron backdrop)
- Maker confidence
- medium-high - design language and staging strongly match documented Don Rex suites (iNVISeDGE states its matching suites carry Don Rex foil labels; ask to see the label on this one). 'Fler Parker era' in the title is seller keyword-hype, not an attribution to Fler/Parker.
- Distinguishing features
- Stepped/scalloped cutout in the lower side/back rail between rear legs (visible in img_3 rear view), low splayed tapered legs, open timber arms with floating upholstered arm panels, three loose back cushions, high flared rear stiles. Same distinguishing cutout appears on the 2025 iNVISeDGE Don Rex suite photos.
- Condition from photos
- Excellent visible condition. Fabric is a uniform, clean blue textured textile with no fading, sagging or staining visible - reads as a professional re-upholstery of the last ~5-8 years rather than original 1960s fabric (no originality premium, but no reupho cost either). Cushions look full with no foam collapse; timber frame shows warm original finish, no visible breaks or major scratches; frame appears tight. Backing fabric of arms fully upholstered.
- Seller condition grade
- Used - Good
Check in person
- Sit and press test: seat foam resilience and webbing - no sag, no collapsed outer seats; lift each cushion and check webbing/springs underneath
- Frame joints and rear rail cutouts (the scalloped detail in img_3) - no cracks/reglue at leg-to-rail joints; rock the sofa to test tightness
- Fabric: confirm recent professional reupholstery (zip/tailoring quality, fabric selvedge or Warwick label) vs 1960s original - if original, value rises (collector premium); if DIY recover, drop toward the low end
- Look for the Don Rex foil/stamped label under cushions or rear rail, and inspect timber for water stains, deep scratches or old varnish failures on the show-frame; note the pair of chairs are a SEPARATE purchase - inspect and price them together
- Confirm what A$1,400 includes (sofa only vs suite) and whether this is ex-iNVISeDGE consignment stock (photos are iNVISeDGE's)
Valuation — private sale, QLD market (AUD)
A$1,100 – A$1,600A$1,350−A$50
mid − ask = −A$50 · confidence: medium - one near-identical dated asking comp (likely the same object) and several dated same-maker comps, but few genuine SOLD prices specifically for a Don Rex 3-seater sofa (only 2005-era hammers documented); condition assessed from professional photos only
Assumed visible condition: professionally re-upholstered within the last ~6 years in good blue textile (NOT original 1960s fabric - no originality premium, but also no -$500-900 Brisbane recover cost), full foam, tight frame, original timber finish needing only a clean/refresh. The strongest data point is the May-2025 iNVISeDGE consignment that is near-certainly this very suite (identical photos/backdrop/title): offers over $1,400 for the sofa alone, $3,500+ for full suite. Dealer tiers for restored Don Rex 3-seaters run $1,995-$3,590; at the market-guide private conversion x0.6-0.7 that implies ~$1,200-$2,000, tempered by the guide's private band of $700-1,600 for a single sofa and an Aug-2026 Gumtree Brisbane ask of $850 for an unknown-condition example. Fresh neutral reupholstery and Don Rex (rarer than Parker/Fler) put this at the top half of the band: $1,100-1,600, mid ~$1,350. The matching chair pair would add roughly $1,000-1,500 of private value (comps: pair sold $1,000-1,195; dealer re-values $1,450-2,095), so a fair all-three price is ~$2,300-2,900 - the dealer's $3,500 full-suite ask is above private-sale.
Upside: Value levers: (1) confirm whether chairs are in the price - a matching Don Rex pair alone supports $1,000-1,500 (dealer re-values up to ~$2,000); (2) ask to see the Don Rex foil label (2 of 3 pieces on the 2025 listing had it - labelled examples hold resale); (3) timber is original and dull in photos - a few hours of strong wood cleaner/oil is a cheap ~$100-200 aesthetic uplift; (4) 3-seaters fetch ~2x 2-seaters in this design and Don Rex is scarcer than Parker/Fler, so resale into the 2026 MCM market is solid; a full original-fabric example would beat this one, but recovering is already paid for here.
Evidence summary
Photos reviewed: img_1 (suite staged at white corrugated-iron shed), img_2 (iNVISeDGE website screenshot embedded in the FB listing), img_3 (rear view showing the model's signature scalloped lower rail). Retrieval found an iNVISeDGE May-2025 consignment with the identical title, identical photos and backdrop ('Vintage 1960's Don Rex 3-Seater Lounge Sofa. Pair Chairs also AVAIL... Boxy.'): offers over $1,400 sofa-only, offers over $3,500 full suite incl. matching pair + nest of tables, 'recently professionally reupholstered', 2/3 pieces with Don Rex foil label, now out of stock. Dated same-maker sales: Don Rex day/night sofa sold $1,295 (2005; 2019 dealer re-value $1,895); restored Don Rex day-bed sold $1,600 (2021); Don Rex chair pairs sold $1,195 (2008) and $1,000 (2019, dealer 2022 re-value $2,095). Dealer asks Sep-2026: Curated Spaces $1,995 (sold out), Collecte $3,590 custom-order, Gumtree Brisbane private ask $850 (condition unknown). Images comp_1..comp_5 downloaded (>5KB each) to research/984758401249619/.
Verdict (NEGOTIATE): FAIR (at ask, sofa only) - A$1,400 equals the dealer's May-2025 'offers over' on this same design and sits at the top of the private band; you'd be paying full retail-fair for a reupholstered example, not finding a bargain. Negotiate to ~A$1,150-1,250 for a genuine buy. If (and only if) the seller means A$1,400 for sofa PLUS the matching chair pair, that is well under their combined value (~$2,300-2,800) and an instant buy - clarify scope first.
Caveats: No verified 2024-2026 SOLD hammer for a Don Rex 3-seater specifically - eBay AU sold searches remain 403-blocked and auction houses rarely list Don Rex seats, so sold anchors are older (2005-2021). The FB listing may literally be the withdrawn/expired iNVISeDGE consignment (photos identical) - if so, the seller is rejecting lowball offers at $1,400 and real negotiation room may be small. Condition (foam, webbing, label) not independently verified. All AUD, private-sale Brisbane/Moreton Bay, Sep 2026.
Hans Borg Vintage Mid Century Modern Teak Sideboard / Lowboy
NEGOTIATE
Ask A$900
Identification (from photos)
- Piece
- Lowboy / all-drawer sideboard — three drawer banks (left narrow bank + two columns of shallow-wide drawers, approx 7-8 drawers total), approx 140-150 cm wide, ~65-70 cm high
- Style
- Australian mid-century modern, Scandinavian-influenced; flat inset drawer fronts, framed carcass with thin beaded base moulding, tall tapered/splayed solid legs with low stretcher rail, turned solid-teak knob pulls
- Era
- Late 1960s to mid 1970s (tapered legs + proud-profile drawer fronts point c.1968-1975, consistent with the Hans Borg firm's c.1965-1980 output)
- Materials
- Teak veneer top (book-matched figure visible in img_2) and teak-veneer drawer fronts; carcass/carcass rails lighter-toned timber or veneer; solid tapered teak legs; oil finish (consistent with seller's stated hand-stripped + Danish/teak oil refinishing)
- Maker guess
- Hans Borg (Bassendean, WA) — plausible attribution; 'Hans Borg' is a genuine documented WA furniture maker, but no label/mark is visible in any of the 4 photos, so maker is unverified from images
- Maker confidence
- medium
- Distinguishing features
- All-drawer (no cupboards) lowboy layout; slim pencil-thin drawer gaps; solid teak button/knob pulls that look original and consistent; tall (~18-20 cm) splayed legs lifting it well off the floor; freshly oiled even satin finish
- Condition from photos
- Good, freshly refinished by the looks of img_1/2: even oil finish, no delamination or major veneer loss visible. Flaws visible: pencil-like scratches/pen marks on top (img_2), small chip/impact at bottom rail corner near front leg (img_3), slight tone variation between freshly oiled fronts and frame. No warps or heavy wear visible. Internal condition, drawer runners and underside not shown.
- Seller condition grade
- Used - like new
Check in person
- Look for a paper label, foil stamp or ink mark (underside of top, back panel, inside drawer bottoms) to actually confirm Hans Borg — none is visible in the photos and the whole title premium rests on it
- Pull drawers out: check runner wear, dovetail/nailed construction, drawer bottoms for water staining, and that all knob pulls are original (mismatched replacements = -10-25%)
- Inspect the top and all veneer edges for the true extent of the scratches seen in img_2 and the corner chip in img_3; check for glue-crazed or plastic-looking reglaze under raking light (a 'Danish oil' resell that is actually polyurethane reglaze is worth less)
- Rock the carcass on the tapered legs and stretcher for loose joints; check underside/framing for beetle shot-holes (common in 50-year-old AU case goods) and confirm actual dimensions (~140-150 cm?) for transport
Valuation — private sale, QLD market (AUD)
A$600 – A$950A$780−A$120
mid − ask = −A$120 · confidence: medium
Two auction hammers (A$1,100 for a larger plain teak 180 cm sideboard; A$1,700 for a named-maker Rodd blackwood sideboard, Apr 2026) set the ceiling for named/unnamed AU teak case goods at the trade level; lowboys sit below sideboards in that hierarchy. The tightest evidence is the asking tier: Chiswell-brand dealer lowboy at $790 (dealer, i.e. ~$500-550 private equivalent), unbranded 9-drawer dealer lowboy at $1,590 (~$950-1,100 private), and a private Gumtree Hamra Brothers 145 cm teak lowboy at $880. Hans Borg is real but a minor WA maker with negligible name premium in SE-QLD, so the piece values as a good-quality, nicely refinished generic-to-regional teak lowboy: mid ~$780, with upside to ~$950 only if a Hans Borg label is present and the piece is at the large end (~150 cm+). Restored-with-original-hardware condition multiplier (~x0.9-1.0) already assumed; visible top scratches and corner chip argue against the top of the band.
Upside: No margin at ask: mid (~$780) is BELOW the A$900 asking (expected margin ≈ -$120). The piece looks genuinely nice and honestly restored, but it is priced at the very top of what this maker tier supports in QLD. Reasonable buy only negotiated to ~$700-780, or at $900 if the buyer simply loves it and dimensions/label check out. The 'Hans Borg' name adds story, not dollars, this far from Perth.
Comparables evidence (5)

Mid Century Teak Sideboard Buffet Drawers Low Boy by Chiswell (dealer stock, live page)Retro Bay (retrobay.com.au)
A$790asking
live/verified 19 Sep 2026 (price confirmed in page JSON)
Very close form factor: AU-made 1970s teak lowboy with proud-profile trim on tapered legs, 'good vintage condition'. Named Chiswell (a stronger brand than Hans Borg) at a dealer asking only $790 — dealer asks convert to ~$470-550 private, showing the lowboy tier is soft
Gumtree Austr…Mid Century Teak Sideboard Dresser, Hamra Brothers (SA-made), 145 cm, privateGumtree Australia (Klemzig SA listing 1343701927, via search snippet — Gumtree blocks direct fetch)
A$880asking
retrieved 19 Sep 2026 (listing date not shown)
Direct private-sale analogue: 145 cm regional-AU-maker teak lowboy-dresser, 'excellent condition', asking $880 — near-identical size, tier and asking to the subject piece
Evidence summary
Photo-first: genuine late-60s/70s AU MCM teak lowboy, teak veneer top with figure, solid tapered legs, original-looking teak knobs, freshly oil-finished with light visible flaws (top scratches, corner chip). 'Hans Borg' attribution checked and partially substantiated: the maker is documented (DAAO 1966 Perth exhibition; Bassendean factory c.1965-1980 per Parker Interiors), but unlabeled in photos. 5 retrieved comparables (2 auction sold: LJ Rodd blackwood sideboard $1,700 Apr-2026, LJ plain teak sideboard $1,100 hammer; 3 asking: Chiswell lowboy $790 dealer live, Retro Bay 9-drawer lowboy $1,590 dealer, private Gumtree Hamra teak lowboy $880). Private-sale band for this maker tier + condition: $600-950, mid $780.
Verdict (NEGOTIATE): fair
Caveats: ["Ask taken as A$900 per task/metadata; scraped page text oddly showed 'A$90' — verify the live price before negotiating (a genuine $90 listing would be an instant-buy red flag/typo).", "eBay AU sold/comp data unusable (403 to automated fetch, no archive), Gumtree prices are search snippets only; Leonard Joel $1,100 hammer has no retrieval-visible date and excludes ~25-30% buyer's premium.", 'Hans Borg-specific sold prices could not be retrieved with numbers (Perth dealer 20th Century Vintage shows several Hans Borg lowboys/sideboards marked SOLD but hides prices once sold; Wayback rate-limited) — if a marked Hans Borg with comparable provenance were found at retail, confidence would rise but the QLD private band is unlikely to move much.', 'No dimensions, no interior photos, no label photo in the listing; valuation assumes ~140-150 cm width and sound internals.']
Vintage Australian Mid-Century Sideboard / Buffet – 1960s–70s
NEGOTIATE
Ask A$850
Identification (from photos)
- Piece
- Sideboard / buffet (long-low credenza), 184.5 W x 41.6 D x 76 H cm per seller
- Style
- Australian mid-century modern, 4 stacked drawers left bank + 2 central sliding doors, moulded integral horizontal pull rails, rounded bullnose top edge, round tapered splayed legs on a recessed plinth base
- Era
- c. 1960s-1970s (plausible from style; consistent with seller claim)
- Materials
- Warm orange-brown timber with bold rotary-cut cathedral figure and faint silvery ray shimmer on drawer fronts — most consistent with Queensland silky oak (veneered panels/doors with solid edging and legs); teak or Queensland maple cannot be excluded from photos alone. No teak-typical dark oil streaks visible.
- Maker guess
- Generic Australian cabinetmaker (silky oak tier — similar to Chatley/Morarty-type production), NOT a Parker/Chiswell/T.H. Brown piece on visible evidence: no brass disc pulls (Parker signature), no Chiswell wave/sculpted hardware, no visible labels. Layout is a common AU-cabinetmaker sliding-door pattern.
- Maker confidence
- low
- Distinguishing features
- Full-width moulded drawer pull rails; sliding (not hinged) doors running in a central stile; felt-lined top-drawer cutlery organiser claimed; very long/low 184.5cm format which is a desirable proportion
- Condition from photos
- Original, honest and heavily-used condition: considerable surface scratching and scuffing on drawer fronts and top rail, water/finish wear, light marks on door panels plus small dark spots (check: borer vs nail holes), a chipped/damaged corner at the bottom of the right side panel (img_4), dusty undersides. No visible veneer bubble, no missing legs, carcass looks square. Photos show no maker's mark.
- Seller condition grade
- Used - Fair
Check in person
- Look for a paper label/ink stamp inside the top drawer, drawer bottoms, and on the rear panel — a Chiswell, Parker, T.H. Brown, or Rosenstengel mark changes the band completely.
- Confirm timber at an concealed edge/inside drawer: silky oak (silvery ray fleck) vs teak (oily, dark streaks) vs laminate-faced chipboard (would drop value to ~$250-400).
- Inspect the small dark spots on the right door panel (img_3) and the chipped bottom corner of the right side panel (img_4) for active borer (frass) and whether the corner damage runs into structure.
- Slide both doors through full travel (tracks often warp/detach) and run all 4 drawers to check runners; confirm the felt cutlery insert is actually present and the shelves are the claimed adjustable ones.
- Check top for the water/heat haze the seller hints at ('considerable surface wear... particularly' — description truncated); a badly hazed top means $200-400 of refinishing.
Valuation — private sale, QLD market (AUD)
A$550 – A$900A$700−A$150
mid − ask = −A$150 · confidence: medium
Silky oak (probable) + no visible maker mark puts this in the silky-oak/generic-AU private band ($300-1,000 market guide; upcycld dealer entry tier $800-1,600 × 0.6-0.7 ≈ $500-1,100 private). Anchors: unbranded MCM buffet cleared $915 IBP at LJ in 2016; damaged branded Parker only $900 hammer Oct 2025; generic AU asks compete at ~$500 on eBay now. Positives pulling to mid/upper band: full 184.5cm long-low format (size premium), complete original hardware, sliding doors intact, felt cutlery tray, structurally sound. Negatives: considerable surface wear visible in every photo, corner damage, spots on right door needing borer check. Mid $700 reflects 'original, honest, heavily-worn, unbranded silky oak'; $900 is only justified if timber/label surprises (stamped Chiswell/Parker or genuine teak carcass).
Upside: Ask $850 sits at the top of the defensible private range — not a bargain, not a rip-off. Open at $550-600, expect to settle $650-750. Real flip margin only if inspection reveals (a) a maker's stamp (Chiswell/Parker/TH Brown → band jumps to $1,000-1,400+, i.e. +$300-500 margin even at $850), or (b) the timber is genuinely solid teak rather than silky oak veneer (+$150-300). Without those, resale after a light clean is ~$700-900 — thin margin after transport (184cm, 2 people) and any restoration.
Comparables evidence (6)

Parker mid-century teak sideboard, damaged top (75 x 183 x 45cm) — Lot 1005Lawsons auction (Sydney), lot page
A$900sold
2025-10-30
Near-identical length class (183 vs 184.5cm) MCM sideboard, 4 drawers + 4 doors. NAMED MAKER (Parker) + damaged top still only made $900 hammer (est. $300-500 beaten). Sets a hard ceiling anchor: a famous-name, similar-size worn teak piece clears at ~$900 at auction; unbranded silky oak sits below this.

A 1960's teak sideboard by 'Parker'Leonard Joel, Furniture & Interiors exceptional results (June 2016)
A$915sold
2016-06
Named-maker AU teak sideboard, $915 IBP (incl. buyer's premium). 2016 figure; MCM has firmed since (+20-30%), so modern equiv. ~$1,100-1,200 for a clean branded Parker-tier piece — our piece is unbranded and worn.

A 1960's Danish style teak buffet (unattributed)Leonard Joel, Furniture & Interiors exceptional results (June 2016)
A$915sold
2016-06
Closest tier match: generic/unattributed MCM buffet at auction, $915 IBP in 2016. Unbranded pieces clear in the high-$800s-low-$900s at auction even 10 yrs ago; hammer ~= trade, private retail modestly above.
Sherwood Baza…Ed Rosenstengel silky oak sideboard (1500mm, original finish) — SOLDSherwood Bazaar Antiques (Brisbane dealer)
A$1,895sold
undated (fetched 2026-09-19)
Silky-oak ceiling comp: a NAMED Brisbane maker, smaller (150cm), dealer-restored stock sold $1,895 retail. ×0.6-0.7 private conversion ≈ $1,150-1,300 for a marked, good-condition silky oak — our piece is unmarked, larger, and heavily worn, so well below this.
eBay Australi…"An Architectural | Vintage | Australian MID CENTURY | Woodcrafted | SIDEBOARD" (eBay AU)eBay Australia category page (live asking, via search snippet)
A$500asking
Sep 2026 (page observed via snippet, 2026-09-19)
Generic unbranded 'Australian mid-century woodcrafted' sideboard asking $500 with 12 watchers — the realistic competing ask for a nameless AU cabinetmaker unit on current online marketplaces. Same snippet shows a Chiswell 3-door asking $1,000 (brand premium).
Evidence summary
4 listing photos reviewed at full detail (overall, drawer close-up, door/end close-up, rear-quarter end). Retrieved comps: 4 SOLD AU auction/dealer results (Lawsons Parker $900 hammer 30 Oct 2025 with lot-page verification; Leonard Joel Parker $915 IBP and Danish-style buffet $915 IBP Jun 2016 from LJ results page; G Plan Fresco $1,200 via Lawsons Nov 2019 via Invaluable) + dealer sold silky oak Rosenstengel $1,895 (Sherwood Bazaar page verified) + live eBay AU generic AU-sideboard ask $500 (Sep 2026 snippet). 3 comparable images downloaded to research dir. No seller claims accepted uncritically; maker attribution deliberately left generic/low-confidence.
Verdict (NEGOTIATE): fair
Caveats: Timber identification is photo-only — silky oak vs teak vs maple materially swings value and could only be confirmed in person; maker absence is inferred from lack of visible marks, not from seeing every surface (a stamp could still exist inside). Only 4 of 9 listing photos were provided (metadata photo_count=9); interior, rear and label shots may exist and could revise confidence. Auction hammer prices exclude ~27% buyer's premium (Lawsons) and represent trade-level clearing, not retail. Listing location (Gold Coast) is ~70km+ outside the stated 15km search radius — transport cost applies. eBay snippet prices are live asking, not sold.
Retro Vintage Chiswell 60's Coffee Table
SKIP
Ask A$340


Identification (from photos)
- Piece
- Rectangular coffee table, glass-top in timber frame
- Style
- Mid-century modern (Australian/Danish-influenced)
- Era
- c.1960s as claimed; consistent with 1960s-70s AU production
- Materials
- Honey/reddish-brown timber frame (seller claims solid teak; colour is warmer than typical grey-brown teak — could be refinished teak or another hardwood; possibly veneered rails), clear-to-light-tinted glass top drop-in on a rebated frame (seller says smoked glass; photos show light green-grey tint, consistent with lightly tinted or clear 6mm glass)
- Maker guess
- Chiswell (claimed; unverified). Design is generic AU/Danish MCM; the leg profile shows a swept, curved shoulder into the apron then a fairly straight taper — it does NOT clearly show Chiswell's signature 'cigar leg' barrel swell through the mid-point described by Upcycld's Chiswell identification guide
- Maker confidence
- low
- Distinguishing features
- Rectangular 110x60x46.5cm proportions; moulded/rounded frame edge; front legs flow into the apron with a gentle concave scroll shoulder; tapered legs; drop-in glass top; no drawer or shelf
- Condition from photos
- Even, satiny finish with no obvious scratches, water rings, veneer lift or repairs visible in the two provided angles; glass appears intact; overall presents well. Both photos are styled living-room shots of the top and long side — underside, underside of frame, leg feet, rear rail and any label/stamp area are not shown.
- Seller condition grade
- Used - Good
Check in person
- Look for a Chiswell label/stamp (usually under the top, on the underside frame rail or apron) — no label and the wrong leg profile means treating it as an unbranded MCM table (~$150-200)
- Inspect the leg profile up close: Chiswell = cigar leg with a barrel swell mid-leg; these read as a straight taper with a swept shoulder — confirm which it is
- Run hands under the frame for veneer lifting, reglue, or replaced legs, and check all four feet for wobble/rotted tips; check the glass underside for chips and whether it is actually smoked or just clear
- Smells/surface test for water rings and heat marks under the oil finish, and check the top's edge mouldings for dings the styled photos don't show; ask the seller for a photo of the underside
Valuation — private sale, QLD market (AUD)
A$150 – A$300A$220−A$120
mid − ask = −A$120 · confidence: medium-low — category pricing is well-evidenced, but only 2 photos, no maker label or underside shown, and the visible leg profile does not clearly confirm Chiswell's cigar-leg signature
Coffee tables are the weak spot of the MCM category: AU auction hammers for teak coffee tables (including a genuine Parker) ran A$25-70 at Lawsons May 2024; Leonard Joel routinely estimates them A$150-260. Named-maker private asks cluster $140-285 (two Chiswell eBay asks $139/$265, Parker op-shop retail $280). Restored-dealer comps ($350-450 MFV, $1,190 Retro Bay large) convert to private at x0.6-0.7 = roughly $230-315 for a plain rectangular example. Chiswell's premium only really applies to sideboards/cabinets — the maker's guide itself calls coffee tables outside its valued lines. A good-condition, correctly-proportioned 110x60cm example with a credible (but unproven) Chiswell attribution supports the top of the private band, so: low $150 (attribution fails / finish flaws), mid $220, high $300 (stamp found, honest original finish, no damage). Ask $340 exceeds the private ceiling — and the listing has sat unsold 19 weeks at that price, corroborating this.
Upside: Thin. Even bought at $220 and resold at $280-320 (a best case with a Chiswell stamp found), gross is $60-100 minus transport/time — not a flip. Only worthwhile as a genuinely nice personal-buy table at $200-250, or if a stamp turns Chiswell proven and pushes resale toward $350.
Comparables evidence (7)
eBay AU listi…Mid Century Chiswell Teak Coffee Table (eBay AU, via PicClick mirror)eBay AU listing mirrored on picclick.com.au (price retrieved from search snippet; page itself 403s bots)
A$265asking
undated (listing live Sep 2026 search)
Direct comp: Chiswell-brand teak MCM coffee table. Asks $265 with 7 watchers — a Chiswell coffee table clears at low hundreds, not $340+.
eBay AU listi…Chiswell Mahogany Oval Coffee Table (eBay AU, via PicClick mirror)eBay AU listing mirrored on picclick.com.au (price from retrieved search snippet)
A$139asking
undated (listing live Sep 2026 search)
Named-Chiswell coffee table, different shape/timber; confirms Chiswell coffee tables are a low-value category line for the maker (sideboards are the collected item).
Evidence summary
Photos: rectangular honey-toned teak-look coffee table, 110x60x46.5cm claimed, drop-in lightly tinted glass, swept-shoulder tapered legs, good visible surface condition. Retrieved comps (verified 19 Sep 2026): Lawsons SOLD A$25 (teak cigar-leg coffee table) and A$70 (Parker teak coffee table), 16 May 2024, page-fetched; Chiswell-brand eBay asks $265 (teak) and $139 (mahogany oval) via retrieved PicClick snippets; MFV dealer ask $450 restored c.1970s teak; ReLove retail $280 Parker; Retro Bay dealer $1,190 large rattan-shelf table (ceiling ref); iNVISeDGE dataset: Parker coffee+2-side nest sold $440 in 2007, ~$529 in 2019; Leonard Joel ests A$150-260 typical, A$500-700 for a top 1960s example (Apr 2021). Chiswell value sits in sideboards/cabinets ($800-2,200 private per Upcycld 2026 guide), not tables. Listing unsold 19 weeks at $340.
Verdict (SKIP): Overpriced / walk-or-negotiate. A$340 is dealer-retail money for a category that privately clears $150-300, and the attribution is unverified. Fair purchase range A$180-250; offer ~$200. Do not pay ask.
Caveats: Only 2 styled photos; no underside/label/stamp visible; timber species (teak vs refinished hardwood) and 'solid frame' claim unverifiable from photos; eBay/PicClick asking prices are undated and not sold evidence; QLD regional buyers add ~1hr transport from Sunshine Coast which caps resale. Auction hammers understate the best private examples by design — they are the floor, not the fair price.
MCM Style Tallboy Drawers / Sideboard
SKIP
Ask A$600
Identification (from photos)
- Piece
- 3-drawer chest of drawers / low tallboy (1060w x 460d x 900h cm per seller)
- Style
- Mid-century modern STYLE (contemporary reproduction of Danish/MCM silhouette: frame-enclosed carcass, crescent finger-pull drawer fronts, tapered splayed metal legs)
- Era
- Modern, circa 2023-2024 ('a couple of years old' per seller — corroborated by photos)
- Materials
- Walnut-look timber; drawer fronts/top read as veneered panels in a solid-wood frame; drawer interiors (img_4) show dark engineered-board (MDF/chipboard-tone) sides with thin timber edge banding; powder-coated tapered steel legs; uniform satin factory lacquer
- Maker guess
- Unbranded modern retail/import piece; spec matches current MCM-repro lines (Article Nera, West Elm Gemini/Mid-Century type, AU imports). Not Parker/Chiswell/Fler/G-Plan — no period maker cues.
- Maker confidence
- low
- Distinguishing features
- CNC-perfect crescent cut-out pulls, perfectly even grain book-matching on drawer fronts, factory-perfect edges with no patina/wear/oxidation at leg feet, modern powder-coated steel conical legs, engineered-board drawer boxes. Seller explicitly states 'not original mid century'. Zero genuine vintage cues (no hand-cut dovetails visible, no old finish wear, no sticker/stamp seen).
- Condition from photos
- Like-new / excellent; no visible scratches, water rings, or leg wear. Honest condition claims match photos.
- Seller condition grade
- Used - like new
Check in person
- Rear panel: confirm whether it is a thin hardboard/MDF back in a groove (repro tell) or a solid timber/ply back — affects both authenticity and rigidity.
- Drawer boxes: pull a drawer — check for real dovetails vs cam-lock/dowel flat-pack assembly, drawer base material (dark MDF seen in img_4), runner quality and soft-close.
- Is the 'solid walnut throughout' claim true: tap/inspect edges for edge-banding on a veneered substrate; weigh it (a true all-solid-walnut 106cm chest is very heavy).
- Look underneath/inside drawers for any maker sticker or import label (identifies retail origin and true new price); inspect leg fixings for wobble and any floor-protectors worn through.
Valuation — private sale, QLD market (AUD)
A$320 – A$520A$420−A$180
mid − ask = −A$180 · confidence: medium — identification is high-confidence (seller + photos agree); value band rests on asking-price anchors since exact-model sold comps for modern repro chests are scarce on AU classifieds
Seller admits it is not vintage and the photos corroborate: engineered-board drawer boxes, factory-perfect finish, CNC pulls, modern powder-coated legs — this is second-hand furniture, not a collectible. Its price ceiling is what it costs new: MCM-repro walnut 3-drawers of this spec retail roughly $1,000-1,500 (Article Nera ~A$1,130; West Elm AU equivalents higher), with the cheap end of the look available brand-new for $279 (IKEA). Like-new modern pieces of this class resell privately at 35-50% of new retail: ~$350-550. That band also sits correctly between the retrieved anchors: genuine vintage sold at auction $400 (defective, LJ 2024) to $1,300 (Summertone, Lawsons 2025), genuine private asks $150-850, new repro retail $1,130+. Asking $600 (+$50 delivery) prices it like a small genuine vintage piece, which it is not.
Upside: Not underpriced: nothing to flip. Offer $350-400, walk above $450. It is only worth the asking if the buyer personally wants a near-new solid-ish walnut chest and would otherwise pay $1,000+ new — as a buy-to-resell, A$600 is above resale and leaves no margin after delivery/time.
Comparables evidence (6)

IKEA RÅDMANSÖ chest of 3 drawers, brown walnut effect, 90x48x81cmIKEA Australia product page (retrieved Sep 2026)
A$279asking
2026 (current listing)
Floor of 'MCM-style walnut 3-drawer': brand new flat-pack does the look for $279 (particleboard). Subject is a heavier/upmarket version of the same idea, so private value sits between this and Article-new.
Evidence summary
4 listing photos reviewed (front, two angles, open-drawer detail) + seller text ('not original mid century... only a couple of years old'). Photo cues: uniform satin finish with zero patina, CNC crescent pulls, engineered-board drawer interiors, powder-coated steel conical legs, book-matched veneer fronts. Comps retrieved 19 Sep 2026: Lawsons SOLD A$1,300 genuine Summertone sideboard (3 Jul 2025); Leonard Joel SOLD A$400 genuine teak sideboard w/ defect (1 Aug 2024); Article Nera repro new ~A$1,130; IKEA repro new A$279; Gumtree genuine-MCM private asks A$150 (refinished) and A$850 (restored 9-drawer).
Verdict (SKIP): likely overpriced
Caveats: eBay AU sold data and Gumtree dated-listing fetches are bot-blocked; Gumtree figures come from retrieved listing-page snippets and are treated as recent-undated. Article price is US retail converted at ~0.66 (freight/tariff differences make it an approximate new-replacement proxy, not an AU shelf price). West Elm AU live prices are JS-rendered and could not be captured (a 2022 Wayback copy carried none), so it is cited only as spec evidence, not price. If the piece proves to be a premium designer-adjacent line (label check) value could move up ~$100-150; no known genuine-vintage upside — it is not vintage.
Mid-Century Modern Armchairs — Restoration Project (Set of 2) chiswell Parker Fler
SKIP
Ask A$550
Identification (from photos)
- Piece
- Pair of low lounge/desk-height armchairs, open slatted back, loose seat cushion design (cushions missing; seller retains one cushion as template)
- Style
- Danish/German-influenced MCM slat-back lounge armchair with sculpted 'wing' paddle armrests flowing into angled side stays; tapered round legs
- Era
- c.1960-1970
- Materials
- Solid teak (sanded to bare timber, patchy finish), one seat on serpentine/no-sag springs over hessian (img_4), the other on black hessian with loose elastic webbing straps (img_1/img_3) — seat systems differ between the two chairs
- Maker guess
- Unbranded import or lesser AU/Danish workshop 'Danish-style' slat-back chair. Title name-drops Chiswell, Parker and Fler but NOTHING in the photos supports any of them: no label/stamp visible anywhere, Chiswell/Parker lounge chairs of the period use cane or solid panel backs (Parker's famous pair at iNVISeDGE has woven-cane backs), and no Fler model (Narvik/Formline/Flerena) matches this wing-arm slat-back form. The nearest named lookalike sold is Van Treight's slats-back, which has a different, more upright frame.
- Maker confidence
- low
- Distinguishing features
- Sculpted wing-shaped armrests (genuinely attractive), 5-slat open teak back, exposed serpentine springs on one chair; partially stripped/sanded with uneven bare-timber patches; the two chairs show DIFFERENT seat suspensions and possibly different timber tone (img_4's rails read darker/redder than img_1's honey teak — may be lighting, must check if it's a true matching pair)
- Condition from photos
- Project condition confirmed: all cushions gone, elastic webbing perished/removed (2 loose straps lying on seat), hessian intact on spring chair, frame sanded unevenly with finish wear and greyed patches on arms/rails; no visible cracks or broken members, joinery integrity unknown from photos; no stamps or labels visible
- Seller condition grade
- Used - Fair
Check in person
- Frame joint tightness: rock-test all arm-to-leg and rail joints — these wings are load-bearing; any loose/failed mortise or split at the arm root adds $150-400 of bench work and kills the flip margin
- Whether BOTH chairs actually match: compare timber species/tone and seat rails — img_4 (serpentine springs, darker redder timber) may be a different chair than img_1 (elastic straps, pale teak); a mismatched pair prices at per-chair × 0.8
- Under-seat search for any stamp/label (Van Treight, Duraform, Danish co-op labels etc.) — presence of a real maker mark moves the pair up roughly 2× the unmarked band
- Foam/cushion reality check: seller retains one cushion as a template only — confirm no cushions are included and price in 2 new cushion sets (~$150-300 each made) before offering
- Extent of sanding already done: check for over-sanded arrises, drum-sander scallops on slats, and whether the greyed arm surfaces still have sound timber depth
Valuation — private sale, QLD market (AUD)
A$150 – A$450A$300−A$250
mid − ask = −A$250 · confidence: medium
AS-IS (pair): unmarked, cushions missing, webbing gone on one chair, finish mid-sand, possible mismatch between the two seats. Applying market-guide project multiplier ×0.25-0.4 to an unmarked slat-back teak pair (band ~A$400-800 as complete pairs, sitting between the A$130 Stutchbury and A$750 Lawsons sold pairs) gives A$150-450, mid ~A$300. Seller has already sanded unevenly, which lowers rather than raises value. POST-RESTORATION (end-scenario): 2 new cushion sets + reupholstery at Brisbane rates ($300-600/chair = $600-1,200), new webbing/Pirelli straps + hessian (~$100-150 materials or $150-250/chair if a tradesman does the seat work), plus frame re-oil/sand. All-in cost for a competent DIYer: roughly A$550 buy + A$700-1,100 = A$1,250-1,650, producing a pair that in today's market resells privately around A$900-1,500 (mid ~A$1,200) IF both chairs match, joints are tight and finish work is clean — i.e. zero-to-thin margin at A$550 ask, small margin only at a discounted buy (~A$300) with DIY upholstery. Dealer-grade restore (outsource $1,200-1,800 work) guarantees a loss at any price near the ask.
Upside: Upside exists only in the end-scenario: buy near A$300, DIY new foam + webbing + fabric (~$350-500 all-in for both) and a clean oil finish, and a genuinely matched, tight pair with the wing arms could privately sell for A$1,000-1,400 (≈ A$200-500 profit plus a good chair for yourself). A hidden maker's stamp under the seat or on a rail (e.g. Van Treight or another named AU/Danish label) would flip the pair to the named-maker band — a restored named pair could fetch A$1,600-2,400 — but assume none until seen.
Comparables evidence (5)

Antiques to Retro (Hobart dealer) — 'Mid Century Armchair by Fler, Aus. c.1950'antiquestoretro.com.au dated asking list
A$675asking
undated page (retrieved 2026-09-19)
Tests the 'Fler' keyword: a genuine named Fler armchair, complete and in good original condition, asks A$675 SINGLE at retail (~A$400-450 private). Our chairs are not Fler; even if they were, two as-is projects ≠ one finished Fler
Evidence summary
Photos: two teak slat-back armchairs, sculpted wing armrests, no cushions, one elastic-webbing seat stripped to hessian with 2 loose straps, one serpentine-spring seat, uneven part-sanded finish, no visible label. Sold comps retrieved: Lawsons generic teak pair A$750 (Jan 2026) and A$130 (Jun 2024); iNVISeDGE stamped Danish Deluxe pair A$1,350 (2015). Dealer asks: Van Treight slats-back single restored A$2,390; genuine Fler single A$675. Market guide bands: retro armchair private A$100-400 each, project ×0.25-0.4, reupholstery A$300-600/chair Brisbane.
Verdict (SKIP): OVERPRICED at A$550 — pass or negotiate hard to A$300-350. The 'chiswell Parker Fler' tags are keyword spam: no stamp/label is visible and the model matches none of the three makers. These are nice-shaped but unmarked slat-back teak projects; sold auction evidence for complete generic teak pairs spans only A$130-750, so an incomplete pair cannot sensibly ask A$550. Worth taking ONLY at ~A$300 and only if the buyer is reupholstering for their own home or is confident in DIY seat work.
Caveats: iNVISeDGE pair sold in 2015 — inflation-adjusts upward but remains a good-condition named-maker ceiling. eBay AU sold data unavailable (403 to automated fetch, no archive copy), so sold evidence leans on two Lawsons hammer prices; both were complete upholstered pairs, so as-is project value is inferred via the guide's project multiplier rather than a directly-matched sold project comp. Listing is 7 weeks old at A$550 with no price drop noted — weak market validation of the ask. Photo ambiguity: img_4's darker timber may be shadow; treated as a risk flag, not a finding. Location shown as Gold Coast/Burleigh Heads — outside the buyer's 15 km Petrie/Caboolture radius (~90 km), a factor in any negotiate-for-DIY decision.
Mid century modern 60's teak Parker bedside table
SKIP
Ask A$495

Identification (from photos)
- Piece
- Single bedside table / bedside chest — open niche shelf over one wide full-width drawer, four legs
- Style
- Mid-century modern, Danish-influenced Australian (Parker Nordic-adjacent silhouette)
- Era
- c. 1960s (seller claims 60's; proportions and leg profile consistent)
- Materials
- Teak veneer top and drawer front over substrate (likely chipboard/MDF core per Parker practice); solid teak/timber tapered round 'cigar' legs
- Maker guess
- Parker Furniture (Aust.) — plausible but unverified from the single photo
- Maker confidence
- low
- Distinguishing features
- Warm honey teak, straight-grain veneer top with solid-look edge banding; open bookshelf niche over a wide drawer front with no visible pull (push-catch or concealed lip pull); slim round tapered legs set slightly inboard; dimensions 56W x 38D x 59H cm sit close to the known Parker Nordic bedside (~46W x 30D x 60H). Seller claims original Parker foil sticker — NOT visible in the only photo. Similar-but-generic Danish/Burgess bedsides exist (iNVISeDGE sold a near-identical design they could not attribute to Parker).
- Condition from photos
- Finish looks clean and even from this angle — light home-set photos in what appears to be a dealer/showroom space (other MCM stock behind). No obvious water rings, veneer lift or leg damage visible on the three visible faces; top surface and rear not shown; drawer runner condition unknowable. Seller states 'Used - like new'.
- Seller condition grade
- Used - like new
Check in person
- Find the claimed original Parker foil sticker (inside top drawer or back panel) and photograph it — the whole Parker premium depends on it; no sticker → treat as generic Danish and cap at ~$200.
- Open and remove the drawer: check runner/dovetail condition, drawer bottom, and whether the concealed/push-catch pull mechanism works.
- Inspect the top and rear for water rings, veneer lift and substrate swelling (chipboard core blisters if a plant pot sat there); the single photo never shows the top surface.
- Ask whether this is one of a pair and whether a matching second is available — matched pairs carry the premium, singles do not.
Valuation — private sale, QLD market (AUD)
A$150 – A$320A$220−A$275
mid − ask = −A$275 · confidence: low — single photo only. Would rise to medium with: a photo of the claimed Parker foil sticker (inside top drawer or rear), rear/side views (substrate & any veneer lift), drawer pulled out (runner/dovetail condition), and confirmation the top has no water damage. If the sticker is present and model is the Nordic drawer version, band top could stretch toward $350–400.
Auction is the cleanest read on singles→pairs: a genuine Parker PAIR of bedside chests hammered $425 at Lawsons in March 2026 on 18 bids (comp 1/2), i.e. ~$210–270 per single as-sold. Upcycld's 2026 maker guide prices an unrestored Parker single at 40–50% of a $350–450 unrestored pair = $140–225 (comp 3). Dealer pair asks of $1,190–1,490 (comp 4) convert to ~$360–415 per single and the $1,250 restored single (comp 5) is a dealer-restored ceiling — neither applies to an original-finish FB single with 1 photo. The piece looks honest and clean with plausible Parker cues (tapered cigar legs, proportions, claimed original sticker), so value it at the middle-upper part of the band: $150–320, mid $220. The asking A$495 is more than a whole PAIR fetched at auction this year.
Upside: No realistic flip margin at A$495: a Parker pair clears ~$425–700 at auction/private, so paying $495 for one bedside is paying a full-pair-plus price for a single. Only worth it as a personal 'perfect match to find later' purchase. Negotiation target: $180–250; walk away above ~$320 unless the sticker and a Nordic drawer model are confirmed, in which case $320–380 is still the honest private ceiling. If the seller actually has a pair listed/priced singly, that changes the maths entirely — ask for the second piece at $350–450 for the two.
Evidence summary
6 retrieved comparables (2 dated AU auction solds from the same 12 Mar 2026 Lawsons sale incl. Parker bedsides pair $425 hammer; 1 published dealer sold/revaluation iNVISeDGE pair $695/$850; Upcycld 2026 Parker single = 40–50% of $350–450 pair; 2 dated dealer asking pairs/singles $1,190–1,250 + Gumtree generic singles $125–350). Images: comp1_lawsons_pair.jpg, comp2_invisedge_pair.jpg, comp3_vl_parker_pair.jpg (vintageluxury restored Parker Nordic pair, sold-out page, no live price — reference only). Photo-first read: plausible Parker Nordic-adjacent bedside (tapered cigar legs, 56x38x59cm, honey teak), but design also matches unattributed Danish/Burgess look-alikes; sticker claim unverifiable from one image.
Verdict (SKIP): likely overpriced
Caveats: Single-photo listing → maker attribution unconfirmed, condition of top/rear/interior unseen; seller 'like new' self-graded. Upcycld guide and Retro Bay/Gumtree figures are dealer-side and used only after ×0.6–0.7 conversion. Lawsons hammer excludes 27% buyer's premium (add it to get what a trade buyer actually paid: pair ≈ $540 all-in). No Gumtree/eBay sold-completed data retrievable (403 blocks) per market guide; auction + dealer data substituted. Valuation assumes QLD private sale, Sep 2026, original finish, no hidden damage.
6 Mid Century Teak Dining Chairs G-Plan Leslie Dandy Vintage 1960s MCM Danish
SKIP
Ask A$1,200
Identification (from photos)
- Piece
- Set of 6 MCM dining chairs (4 side + 2 claimed carvers; carver arms partially visible in img_3, not fully confirmed)
- Style
- Mid-century modern, Danish-influenced English style
- Era
- Late 1960s - early 1970s
- Materials
- Teak (or afromosia/'African teak' typical of later G-Plan frames) with original woven-gabardine-style upholstered seat and back panels
- Maker guess
- Attributed by seller to G-Plan 'Leslie Dandy'; NOT supported by photos. Every documented Leslie Dandy for G-Plan dining chair (Fresco range) is an open slat/splat-back with upholstered seat only. These have fully upholstered back panels - a different, much more generic late-60s/70s English or Danish-style model. Likely G-Plan-adjacent or unmarked; plausible family provenance but not the named designer model.
- Maker confidence
- low (attribution claimed but form contradicts verified Dandy examples; no maker stamp visible in any photo)
- Distinguishing features
- Tall upholstered back panel set in a frame with gently arched top rail; straight tapered square legs; simple rail-and-leg seat construction; carver versions have sculpted curved arms (img_3)
- Condition from photos
- Used - Fair (seller's own grade). Visible: split/open joint where top rail meets rear stile on one chair (img_2 - structural, reglue/clamp repair needed); dark stains and marks on back-panel fabric of at least 2 chairs (img_2, img_3); soiling/shading on seat pads (img_4); finish overall honest with some scuffs. Complete set of 6 appears present in img_1.
- Seller condition grade
- Used - Fair
Check in person
- Turn chairs over: look for a G-Plan paper label/painted mark or 'Made in England' stamp under the seat; absence confirms generic attribution and justifies the lower band
- Wobble-test all 6, especially the chair in img_2 - the crest-rail/stile joint is visibly split; check whether any others have reglues or loose rear stile joints
- Inspect upholstery on all 6 seat pads and backs for the stains seen in img_2/img_3 - confirm no frame damage under the fabric and get an upholsterer quote if re-covering all panels
- Confirm the set is truly 6 INCLUDING 2 carver armchairs (only 4 side chairs clearly shown; carver arms only hinted in img_3) and that all 6 match
Valuation — private sale, QLD market (AUD)
A$500 – A$950A$700−A$500
mid − ask = −A$500 · confidence: medium - strong sold anchors and a decisive design-attribution check, but no maker stamp photo and only 4 of 6 listing photos reviewed; per-chair joint condition unknown
Market guide bands: unbranded/Danish-style teak set of 6 private $400-900; named-maker $900-1,700 (Parker anchor sold $2,100; Danish sold $1,895; G-Plan restored UK dealer sold ~$1,780 retail = private ~$1,070-1,250). Subject fails BOTH uplifts: (1) attribution to the premium Leslie Dandy model is contradicted by photos - real Dandy chairs are slat-back, these are generic upholstered-back (comp_1/comp_4), and no stamp is visible; (2) visible condition faults - open/split top-rail joint on at least one chair (repair ~$100-250) and stained/dingy original fabric on several panels (full 6-chair reupholstery A$900-1,800 if desired, though fabric is usable/cleanable). Place in unbranded-to-generic-G-Plan band, mid-low: $500-950, mid $700. Asking $1,200 prices it as a genuine named-designer set in good condition, which the photos do not support.
Upside: No margin at ask. Upside only if negotiation lands <=A$700: clean + reglue one rail (~$150 DIY) and sell on as an honest 6-chair MCM set (incl. 2 carvers, which locals like) for ~A$950-1,100 -> ~A$250-400 gross. The 'Leslie Dandy' premium is not real here; do not pay for it.
Evidence summary
4 listing photos reviewed. Verified Leslie Dandy/G-Plan Fresco chairs (Scandinavian Modern ask USD2,900; Pamono ask USD1,009/4; Etsy; Instagram dealer posts) are all open slat-back with seat-only upholstery - subject's fully upholstered backs do not match. Sold anchors (retrieved): iNVISeDGE 6 Danish chairs $1,895 (2023), iNVISeDGE 6 Parker $2,100 (Apr 2020), Bull+Tash G-Plan set of 6 GBP950 sold (~A$1,780, restored). FX from Frankfurter/ECB 18 Sep 2026. Market guide (_market_guide.md) unbranded band $400-900 applied given failed attribution + visible faults.
Verdict (SKIP): SKIP at A$1,200 (overpriced ~70% over mid-value). Only worth pursuing if inspection shows tight joints, a genuine G-Plan stamp AND the buyer will pay near A$600-700; make an offer ~A$550 anchored on the cracked rail joint and stained fabric.
Caveats: Photos only - joint tightness of the other 5 chairs unknown; a genuine G-Plan stamp plus tight joints and a full 6 (2 carvers) would justify the top of the band (A$950-1,050, still below ask). Currency conversions use ECBFR rates 18 Sep 2026. eBay AU sold data unavailable (403 block) per retrieval-gap note in market guide; Gumtree comps not retrievable. vntg/Pamono dates come from live search snippets.
Mid Century Modern Parker XL Teak Sideboard
SKIP
Ask A$3,490

Identification (from photos)
- Piece
- Sideboard / buffet credenza, four doors with central four-drawer bank (XL format, stated 2270L x 450D x 740H)
- Style
- Mid-century modern, Parker 'Nordic' cat's-eye range
- Era
- circa 1960s
- Materials
- Teak veneer on chipboard/ply substrate (typical Parker construction); warm mid-tone teak, fine straight grain; tops reads slightly lighter at front edge - check edge banding
- Maker guess
- Parker Furniture (AUS), Nordic cat's-eye model, XL 4-door config
- Maker confidence
- medium - layout, proportions and hardware match the known Parker Nordic XL exactly (Astton lists the same 2270x455x740 XL cat's-eye), and the 2270/450/740 dims match that model to the cm; but no stamp/label visible in the only photo, and Burgess and others made near-identical Parker-era pieces
- Distinguishing features
- Round recessed cat's-eye pulls (confirmed in zoom crop: dark circular recessed discs with small centre lever on all 4 doors + 4 drawers); straight tapered round legs (seller calls them 'cigar legs' - note the Parker XL buffet is also documented with sleigh legs, so leg style varies); flat flush top; symmetrical 2-door / 4-drawer / 2-door layout
- Condition from photos
- Front elevation looks honest and even; satin sheen consistent with original finish, no obvious water rings or veneer lifts in view. Seller discloses two patched holes in two doors 'as per photo' - but the single photo shows NO patch, so the damage is unverified and unseen. Internals, rear, underside and legs-base unseen. Sold 'as is' with restoration offered for extra cost.
- Seller condition grade
- Used - Good
Check in person
- Parker stamp/label: look inside top drawer, underside of top, and rear panel - unmarked examples are 'Parker-era style' and worth 20-30% less
- The two patched door holes - absent from the single photo: locate, check filler has pulled or veneer is lifting; poor patch = x0.5-0.7 territory
- Rear panel and bottom edges: Parker chipboard edges crumble when knocked and are not repairable - run fingers along all bottom/rear edges
- Drawer runners and boxes: Parker used dovetailed boxes on wooden runners; also check top for water rings and the front top edge banding for a lighter repair/refinish line
- Confirm timber and leg style vs seller claims ('cigar legs' in description; photo shows straight tapered round legs) - discrepancies in a 1-photo listing are a mis-description risk flag
Valuation — private sale, QLD market (AUD)
A$1,900 – A$2,900A$2,400−A$1,090
mid − ask = −A$1,090 · confidence: low-medium - starts at low from a single front-view photo; raised slightly by an exact-dimension model comp, held down by no visible stamp/label, patches claimed 'as per photo' but not actually shown, and unseen internals/rear/underside
Model match is strong (XL cat's-eye, dims identical to the $6,590 restored Astton example) so the dealer ceiling for this model is high, but dealer retail converts to private at x0.6-0.7 (~$3,950-4,600 only if professionally restored). This piece is unrestored original with two disclosed (invisible) door patches - veneer-repair discount x0.5-0.7 off the top of the band - and sold 'as is'. Sold anchors for smaller/cleaner Parkers are $1,895-2,190; Parker cats-eye private band is $1,600-3,000 with XL pulling toward the top and condition pulling back. Net private-sale range in QLD Sep 2026: $1,900-2,900, mid ~$2,400 as-is; if the seller's full restoration were included, ~$2,800-3,200.
Upside: If it carries a Parker stamp, has dovetailed drawer boxes, sound chipboard edges and the patches are neat, buying at ~$2,200-2,400 and doing a light professional restoration (~$400-700) could support a resale or replacement value of $3,200-3,900 - modest margin, only real upside if acquired at/below $2,200.
Comparables evidence (5)

Mid Century Parker Cats Eye Nordic Teak SideboardBazaa (dealer)
A$4,895asking
retrieved 19 Sep 2026 (listing current on collection page)
Same Parker cats-eye Nordic model; dealer asking, condition grade not stated as restored. Same platform also lists a 'professionally restored' Parker Nordic at $3,950.
Evidence summary
5 retrieved comparables: 3 sold (iNVISeDGE: Parker $2,190 2024; Burgess cat's-eye $1,895 2023; Parker Nordic small worn $1,195 2023) and 2 dated dealer asks (Astton XL cat's-eye restored $6,590 - exact model/dims; Bazaa cats-eye Nordic $4,895, restored Nordic $3,950). Market guide anchors: Parker private cats-eye/Nordic band $1,600-3,000; dealer-to-private conversion x0.6-0.7.
Verdict (SKIP): Overpriced at A$3,490 - skip at ask; negotiate toward A$2,300-2,600. The ask sits at restored-dealer territory (Astton sells the same XL restored at $6,590; x0.6-0.7 private conversion ~$4,000, but only for a restored piece) while this one is as-is original with two patched doors and no proof of the Parker stamp. Fair buy price as-is is ~$2,400; walk away above ~$2,800 unless stamped, structurally perfect and the patches are professionally done or the seller funds restoration.
Caveats: Single front-view photo only - patches, stamp, internals, rear and underside all unverifiable. eBay AU sold data and Gumtree dated pages are fetch-blocked (403), so sold evidence rests on consignment/auction-style sources which skew Melbourne/Sydney; Brisbane prices are typically at the softer end. Astton's own $6,590 XL piece is mid-restoration (archive photos of a sold twin), so treat it as an upper model ceiling, not a live like-for-like comp.